Relief Valve (Transmission Lubrication) - Assemble
组装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 1P-0510     | 冲头总成     | 1     |
- 将节流孔螺塞 (15) 安装到歧管 (3) 中。
Show/hide table
图 1 | g01432412 |
- 将垫圈 (11) 和弹簧 (10) 安装到阀 (12) 中。
Show/hide table
图 2 | g01431707 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
- 将阀 (12) 安装到阀体 (13) 中。
- 将盖 (9) 安装到阀体 (13) 上。 将盖 (9) 拧紧至扭矩为 85 ± 10 N·m (6 ± 7 lb ft)。
- 将密封件 (14) 安装到阀体 (13) 上。
- 使用工具 (A) 将节流孔螺塞 (8) 安装到歧管 (3) 上。
注: 安装时确保节流孔螺塞 (8) 的表面 (X) 与歧管 (3) 的表面 (Y) 齐平。
Show/hide table
图 3 | g01432296 |
- 将阀组件 (7) 安装到歧管 (3) 上。 拧紧阀组件 (7) 至扭矩为 41 ± 7 N·m (30 ± 5 lb ft)。
- 将 O 形密封圈 (4) 安装到螺纹接头组件 (5) 上。 将螺纹接头组件 (5) 安装到歧管 (3) 中。 拧紧螺纹接头组件 (5) 至扭矩为 34 ± 3 N·m (25 ± 2 lb ft)。
Show/hide table
图 4 | g01431703 |
- 将盖 (6) 安装到螺纹接头组件 (5) 上。
- 将 O 形密封圈 (2) 和 O 形密封圈接头 (1) 安装到歧管 (3) 中。 拧紧 O 形密封圈接头 (1) 至扭矩为 35 ± 4 N·m (26 ± 3 lb ft)。
Show/hide table
图 5 | g01431697 |
End By: 安装润滑安全阀。
Caterpillar Information System:
3406E and C15 Marine Engines Heat Exchanger
2007/11/12 Use the Turbocharger Seal Kit to Repair Exhaust Leaks {1052, 1053, 7555}
797F Off-Highway Truck Power Train Relief Valve (Transmission Lubrication) - Disassemble
3176C, 3406E and 3456 Industrial Engines Data Link - Test
2007/11/19 A New Water Seal and a New Spacer are Used for the Water Pumps {1361, 1361}
G3600 Engines Sensor Supply - Test
3406E and C15 Marine Engines Engine Oil Pan
3406E and C15 Marine Engines Engine Oil Pan
C13 and C15 On-Highway Engines Configuration Parameters - Customer Specified Parameters
Procedure to Prevent or Correct Multi-Station Control System (MSCS) Throttle Issues{1901, 1915, 3065, 5910} Procedure to Prevent or Correct Multi-Station Control System (MSCS) Throttle Issues{1901, 1915, 3065, 5910}
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Event Codes
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Air Shutoff - Test
797F Off-Highway Truck Power Train Relief Valve (Transmission Main) - Disassemble
2007/11/01 A New Purge Pump and Service Pack are Now Used {107P, 1408, 1900}
2007/12/24 Combustion Inserts in the Cylinder Head {1100}
G3520B Engines Air Lines
2007/12/24 A New More Rugged Sump Pump Is Now Used {1324}
797F Off-Highway Truck Power Train Relief Valve (Transmission Main) - Assemble
797F Off-Highway Truck Power Train Screen (Transmission Scavenge) - Remove and Install
797F Off-Highway Truck Power Train Transmission Hydraulic Control - Remove
C9.3 Marine Auxiliary Engines Turbocharger - Inspect
3176C, 3406E and 3456 Industrial Engines Air Shutoff - Test
G3520B Engines Engine Oil Pressure Sensor
C9 Petroleum Engines Electronic Unit Injector Sleeve - Remove