A New Troubleshooting Procedure Is Now Available for the Seat Belt Retraction on Certain Wheel Loaders {7307, 7312, 7327}
- Wheel Loader
- 924K (S/N: KW41-UP; ENC1-1566; HJF1-818; PWR1-4842; SNZ1-UP)
- 926M (S/N: LTE1-UP)
- 930K (S/N: DYB1-486; EYE1-789; FRK1-UP; P3K1-UP; RHN1-4484)
- 930M (S/N: KTG1-UP; HEY1-UP)
- 938K (S/N: W8K1-UP; SWL1-4358; REP1-UP; XXT1-962; HFW1-932)
- 938M (S/N: J3R1-UP)
- 926M (S/N: LTE1-UP)
Reference: Special Instruction, M0085273, Troubleshooting Procedure for the Seat Belt Retraction on Certain Wheel Loaders
A new troubleshooting procedure for the seat belt retraction is now available for the machines listed above. The orientation of the seat belt housing provides proper retraction and increases the durability of the seat belt and the housing.
Show/hide table
| |
| Illustration 1 | g06196968 |
| (A) 35 ± 5 degree | |
Refer to Special Instruction, M0085273 for the troubleshooting procedure and orientation of the seat belt housing.
The Special Instruction is available through the normal literature distribution system. The publication can also be found on the CaterpillarService Information System (SIS).
Caterpillar Information System:
320 GC, 320 and 323 Excavator Joystick Controls
Improved Routing for Breather Pipe Is Now Used on Certain Wheel Feller Bunchers and Wheel Skidders {1317} Improved Routing for Breather Pipe Is Now Used on Certain Wheel Feller Bunchers and Wheel Skidders {1317}
C9.3B Aftertreatment Systems Sensor Signal (Analog, Active) - Test - Aftertreatment
C9.3B Aftertreatment Systems Sensor Calibration Required - Test - Aftertreatment
320GC Excavator Engine Supplement Water Separator and Fuel Priming Pump - Remove and Install
Electronic Unit Injectors on Certain C4.4 Machine Engines {1251, 1254, 1290} Electronic Unit Injectors on Certain C4.4 Machine Engines {1251, 1254, 1290}
990K Wheel Loader Systems Joystick Control and Mounting
AD 22 Underground Articulated Truck Steering Systems System Pressure - Release
AD22 Underground Articulated Truck Frame and Body Support Pads - Clean/Inspect
AD22 Underground Articulated Truck Capacities (Refill)
New Flywheel Housing Used on Certain 844K and 990K Machine Engines {1157} New Flywheel Housing Used on Certain 844K and 990K Machine Engines {1157}
D3-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Seat Belt
Troubleshooting Procedure for Seat Belt Retraction on Certain Wheel Loaders {7307, 7312, 7327} Troubleshooting Procedure for Seat Belt Retraction on Certain Wheel Loaders {7307, 7312, 7327}
C9.3B Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
Bluetooth Operator ID and Machine Security System (MSS) Configuration - Machine Security System
C27 and C32 Tier 4 Final Marine Engines Valve Mechanism Cover
C9.3B Engines for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Specifications Relief Valve (Line)
C9.3B Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
336 and 336 GC Excavator Selective Catalytic Reduction Warning System
320 GC, 320 and 323 Excavator Machine Security System
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Cylinder
A New O-Ring Seal in the Implement Lines group is Now Used on Certain 631K and 637K Wheel Tractor-Scrapers {5051, 5057} A New O-Ring Seal in the Implement Lines group is Now Used on Certain 631K and 637K Wheel Tractor-Scrapers {5051, 5057}
C9.3B Engines for Caterpillar Built Machines Crankcase Pressure Sensor - Remove and Install