C27 and C32 Tier 4 Final Marine Engines Caterpillar


Engine Oil Filter

Usage:

C32 AX2


Illustration 1g06219933
Typical Example

Table 1
Item  Qty  Part  Specification Description 
8C-3446 Sampling Valve  Torque to 19 ± 3 N·m (168 ± 27 lb in)
2M-1538 Taperlock Stud  Torque to 37 ± 5 N·m (27 ± 4 lb ft)
109-0078 O-Ring Seal  Lubricate the bore of O-ring seals of the tube assemblies lightly with the fluid that is being sealed. 
4N-8150 Spring  Length under test force is 55.24 mm (2.175 inch).
Test force is 75.619 ± 5.800 N (17.0 ± 1.3 lb).
Free length after test is 93.726 mm (3.6900 inch)
2P-4304 Hollow Stud  Apply red Loctite 271 to the threads on the tapered end to the length of 10.2 ± 1.5 mm (0.40 ± 0.06 inch).
Torque to 80 ± 14 N·m (59 ± 10 lb ft)
1R-1808 Engine Oil Filter  Before assembly, lubricate the seal with clean oil.
Tighten to an additional 3/4 turn after the filter gasket contacts with filter base assembly. 
7F-9090 Drive Screw  Torque to 25 ± 6 N·m (221 ± 53 lb in)

Caterpillar Information System:

992K Wheel Loader Systems Pump Control Valve - Pressure Compensator, Brake
C27 and C32 Tier 4 Final Marine Engines Temperature Sensor (Exhaust)
C27 and C32 Tier 4 Final Marine Engines Engine Support (Rear)
3500B Engines Air Regulator - Remove and Install - Air Starting
C32 Tier 4 Final Marine Engines Fuel Filter Base
C32 Tier 4 Final Marine Engines Fuel Filter
AD 22 Underground Articulated Truck Steering Systems Piston Pump (Steering, Hoist)
AD22 Underground Articulated Truck Hydraulic System Piston Pump (Brake, Hoist, Fan)
320 GC, 320 and 323 Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Medium Pressure Line) (Attachment Valves #3, #5
631K OEM Wheel Tractor Machine Systems General Information (Power Train System)
374F Excavator Machine Systems Pump Control (Output Flow) - Test - One Pump Calibration
MD6310 Rotary Drill Hydraulic System Oil - Change
973K Track-Type Loader Machine Systems Piston Pump (Implement) - Remove and Install
MD6310 Rotary Drill Hammer Lubricator - Check/Add
631K OEM Wheel Tractor Machine Systems Location of Components (Power Train System)
D11T Track-Type Tractor Engine Supplement Bottom Guard - Lower
631K OEM Wheel Tractor Machine Systems Electronic Control (Power Train System)
G3516 TA Engine Engine Overspeeds
631K OEM Wheel Tractor Machine Systems Transmission System - Tractor Power Train
Fuel Line Modification Required When Replacing C27/C32 Engine Lines Group on Certain Wheel Loaders and Wheel Dozers {1261, 1274} Fuel Line Modification Required When Replacing C27/C32 Engine Lines Group on Certain Wheel Loaders and Wheel Dozers {1261, 1274}
MD6310 Rotary Drill Dust Collector Filters - Replace - If Equipped
631K OEM Wheel Tractor Machine Systems Torque Converter
631K OEM Wheel Tractor Machine Systems Gear Pump (Transmission Charging, Scavenge)
Tilt Lines Rework Instructions Are Now Available For Certain D6R Track-Type Tractors {5057, 5104} Tilt Lines Rework Instructions Are Now Available For Certain D6R Track-Type Tractors {5057, 5104}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.