MD6310 Rotary Drill Caterpillar


Hammer Lubricator - Check/Add

Usage:

MD6310 DLK


Illustration 1g06219460

The hammer oil tank is used to lubricate the drill bit and is located on the left-side of the machine.



Illustration 2g06203946
(1) Fill cap

The monitoring system will tell you the oil level of the tank. Fill the tank when required.

Fill the tank by using the fill port on top of the tank. Remove the cap and add oil until the appropriate level is reached. Reinstall the cap of the fill port.

Caterpillar Information System:

973K Track-Type Loader Machine Systems Piston Pump (Implement) - Remove and Install
C27 and C32 Tier 4 Final Marine Engines Engine Oil Filter
992K Wheel Loader Systems Pump Control Valve - Pressure Compensator, Brake
C27 and C32 Tier 4 Final Marine Engines Temperature Sensor (Exhaust)
C27 and C32 Tier 4 Final Marine Engines Engine Support (Rear)
3500B Engines Air Regulator - Remove and Install - Air Starting
C32 Tier 4 Final Marine Engines Fuel Filter Base
C32 Tier 4 Final Marine Engines Fuel Filter
AD 22 Underground Articulated Truck Steering Systems Piston Pump (Steering, Hoist)
AD22 Underground Articulated Truck Hydraulic System Piston Pump (Brake, Hoist, Fan)
320 GC, 320 and 323 Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Medium Pressure Line) (Attachment Valves #3, #5
631K OEM Wheel Tractor Machine Systems General Information (Power Train System)
631K OEM Wheel Tractor Machine Systems Location of Components (Power Train System)
D11T Track-Type Tractor Engine Supplement Bottom Guard - Lower
631K OEM Wheel Tractor Machine Systems Electronic Control (Power Train System)
G3516 TA Engine Engine Overspeeds
631K OEM Wheel Tractor Machine Systems Transmission System - Tractor Power Train
Fuel Line Modification Required When Replacing C27/C32 Engine Lines Group on Certain Wheel Loaders and Wheel Dozers {1261, 1274} Fuel Line Modification Required When Replacing C27/C32 Engine Lines Group on Certain Wheel Loaders and Wheel Dozers {1261, 1274}
MD6310 Rotary Drill Dust Collector Filters - Replace - If Equipped
631K OEM Wheel Tractor Machine Systems Torque Converter
631K OEM Wheel Tractor Machine Systems Gear Pump (Transmission Charging, Scavenge)
Tilt Lines Rework Instructions Are Now Available For Certain D6R Track-Type Tractors {5057, 5104} Tilt Lines Rework Instructions Are Now Available For Certain D6R Track-Type Tractors {5057, 5104}
631K OEM Wheel Tractor Machine Systems Oil Filter (Transmission)
C9.3B Engines for Caterpillar Built Machines Connecting Rod Bearings - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.