Hydraulic Tank - Remove and Install
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 439-3938 | Link Bracket | 2 |
| B | 1U-9200 | Lever Puller Hoist Gp | 1 |
| 386-6031(1) | Lever Puller Hoist Gp | 1 | |
Show/hide table
| (1) | This part number complies with European requirements. |
Start By:
- Remove the left track brake.
- Remove the piston pump (implement).
Show/hide table
 |
|
Personal injury can result from hydraulic oil pressure and hot oil. Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system. Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. |
Show/hide table
| |
| Illustration 1 | g06206295 |
Show/hide table
| |
| Illustration 2 | g06206478 |
Show/hide table
| |
| Illustration 3 | g06206531 |
Show/hide table
| |
| Illustration 4 | g06206551 |
Show/hide table
| |
| Illustration 5 | g06206575 |
Show/hide table
| |
| Illustration 6 | g06206583 |
Show/hide table
| |
| Illustration 7 | g06206594 |
Show/hide table
| |
| Illustration 8 | g06206605 |
- Install the hydraulic tank in the reverse order of removal.
Show/hide table
| |
| Illustration 9 | g06206626 |
Show/hide table
| |
| Illustration 10 | g06206628 |
Caterpillar Information System:
D6K Track-Type Tractor Fuel System - Prime
D6K Track-Type Tractor Backup Alarm
D6K Track-Type Tractor Backup Alarm - Test
320 GC, 320 and 323 Excavator Belt - Inspect/Adjust/Replace
320GC, 320 and 323 Excavators Machine Systems Main Control Valve - Disassemble
D6K Track-Type Tractor Engine Air Filter Primary and/or Secondary Element - Clean/Replace
D6K2 Track-Type Tractor Machine Systems Ripper Control Linkage - Remove and Install
D6K Track-Type Tractor Fuel System Primary and Secondary Filters - Replace
320GC, 320 and 323 Excavators Machine Systems Stick - Remove and Install
994K Wheel Loader Systems Air Lines
An Improved Sealing Process for Air Conditioning Cover Bolts and Bosses on Certain Series K, Series L, Series M, and Series GC Medium Wheel Loaders {7320} An Improved Sealing Process for Air Conditioning Cover Bolts and Bosses on Certain Series K, Series L, Series M, and Series GC Medium Wheel Loaders {7320}
Scuffing/Scoring May Occur in Bevel Gear Set on Certain 992K and 854K Wheel Dozers {3254, 3256, 3257, 3258} Scuffing/Scoring May Occur in Bevel Gear Set on Certain 992K and 854K Wheel Dozers {3254, 3256, 3257, 3258}
New One Piece Starter Housing is Used on Certain 824K, 825K, and 826K Machines {1453} New One Piece Starter Housing is Used on Certain 824K, 825K, and 826K Machines {1453}
Instructions for Sorting and Replacing HVAC Actuators {1800, 7320} Instructions for Sorting and Replacing HVAC Actuators {1800, 7320}
Engine Shutdown Procedure on Certain C4.4 Machine Engines {108I, 108U} Engine Shutdown Procedure on Certain C4.4 Machine Engines {108I, 108U}
D6K Track-Type Tractor Tracks
992K Wheel Loader General Information (Power Train System)
D6K Track-Type Tractor Front Idler Position - Check/Adjust
D6K Track-Type Tractor Hydraulic System Oil - Change
D6K Track-Type Tractor Hydraulic System Oil Filter (Winch) - Replace - If Equipped
Improved Hose Routing for the Hydraulic Discharge Screen Hose is now used on Certain D11T Track-Type Tractors {5068} Improved Hose Routing for the Hydraulic Discharge Screen Hose is now used on Certain D11T Track-Type Tractors {5068}
D6K Track-Type Tractor Leaving the Machine
D6K Track-Type Tractor Condenser (Refrigerant) - Clean
D6K Track-Type Tractor Cooling System Level - Check