D6K2 Track-Type Tractor Machine Systems Caterpillar


Ripper Control Linkage - Remove and Install

Usage:

D6K2 6S6

Removal Procedure

Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576

Table 1
Required Tooling 
Tools  Part Number  Part Description  Qty 
422-2352  Jack Stand Gp 
350-7768  Electric Hydraulic Pump Gp (115V) 
350-7769 Electric Hydraulic Pump Gp (230V) 
4C-9633 Puller Stud 
1P-1833 Bearing Puller Adapter 
9S-5565 Pin Puller Sleeve As 
6V-3160 Double Acting Cylinder 
9U-6833 Nut 

------ WARNING! ------

When you are using hydraulic cylinders and puller studs, always ensure that the rated capacity of the puller stud meets or exceeds the rated capacity of the hydraulic cylinder. If the puller stud does not meet or exceed the rated capacity of the hydraulic cylinder, a sudden failure of the puller stud could occur. The sudden failure of the puller stud could result in personal injury or death.




Illustration 1g06206139


Illustration 2g06206144
Release the system pressure. Refer to Disassembly and Assembly, "System Pressure - Release".


Illustration 3g06206179


Illustration 4g06206191


Illustration 5g06206213


Illustration 6g06206216
Repeat for the other ripper control linkage.

Installation Procedure

  1. Install the ripper control linkage in the reverse order of removal.


Illustration 7g06206233

Caterpillar Information System:

D6K Track-Type Tractor Fuel System Primary and Secondary Filters - Replace
320GC, 320 and 323 Excavators Machine Systems Stick - Remove and Install
994K Wheel Loader Systems Air Lines
An Improved Sealing Process for Air Conditioning Cover Bolts and Bosses on Certain Series K, Series L, Series M, and Series GC Medium Wheel Loaders {7320} An Improved Sealing Process for Air Conditioning Cover Bolts and Bosses on Certain Series K, Series L, Series M, and Series GC Medium Wheel Loaders {7320}
Scuffing/Scoring May Occur in Bevel Gear Set on Certain 992K and 854K Wheel Dozers {3254, 3256, 3257, 3258} Scuffing/Scoring May Occur in Bevel Gear Set on Certain 992K and 854K Wheel Dozers {3254, 3256, 3257, 3258}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499} Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Recommendations for Calculating Service Brake Shimming During Axle Repairs on Certain Telehandlers {5486} Recommendations for Calculating Service Brake Shimming During Axle Repairs on Certain Telehandlers {5486}
A Procedure to Rework the Air Conditioner Group Filter Cover Is Used for Certain K-Series and M-Series Medium Wheel Loaders {7320, 7342} A Procedure to Rework the Air Conditioner Group Filter Cover Is Used for Certain K-Series and M-Series Medium Wheel Loaders {7320, 7342}
D6K2 Track-Type Tractor Machine Systems Ripper Lift Cylinder - Remove and Install
C7.1 Engines Welding Precaution
D6K2 Track-Type Tractor Machine Systems Accumulator (Hydraulic) - Remove and Install
D6K Track-Type Tractor Fuses and Circuit Breakers - Replace/Reset
D6K Track-Type Tractor Engine Air Filter Primary and/or Secondary Element - Clean/Replace
320GC, 320 and 323 Excavators Machine Systems Main Control Valve - Disassemble
320 GC, 320 and 323 Excavator Belt - Inspect/Adjust/Replace
D6K Track-Type Tractor Backup Alarm - Test
D6K Track-Type Tractor Backup Alarm
D6K Track-Type Tractor Fuel System - Prime
D6K2 Track-Type Tractor Machine Systems Hydraulic Tank - Remove and Install
New One Piece Starter Housing is Used on Certain 824K, 825K, and 826K Machines {1453} New One Piece Starter Housing is Used on Certain 824K, 825K, and 826K Machines {1453}
Instructions for Sorting and Replacing HVAC Actuators {1800, 7320} Instructions for Sorting and Replacing HVAC Actuators {1800, 7320}
Engine Shutdown Procedure on Certain C4.4 Machine Engines {108I, 108U} Engine Shutdown Procedure on Certain C4.4 Machine Engines {108I, 108U}
D6K Track-Type Tractor Tracks
992K Wheel Loader General Information (Power Train System)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.