D6K Track-Type Tractor Caterpillar


Backup Alarm - Test

Usage:

D6K2 6S6


Illustration 1g01217394

Turn the engine start switch to the ON position to perform the test.

Apply the service brakes. Disengage the parking brake. Move the transmission control lever to the REVERSE position.

The backup alarm should sound immediately. The alarm alerts the people behind the machine that the machine is backing up. The backup alarm should continue to sound until the transmission control lever is moved to the NEUTRAL position or to the FORWARD position.



Illustration 2g06206236

The backup alarm is on the left side of the machine below the access door for the DEF tank on the rear of the machine.

The nonadjustable backup alarm is set at the appropriate sound level when the machine is shipped from the factory.

Caterpillar Information System:

320 GC, 320 and 323 Excavator Belt - Inspect/Adjust/Replace
320GC, 320 and 323 Excavators Machine Systems Main Control Valve - Disassemble
D6K Track-Type Tractor Engine Air Filter Primary and/or Secondary Element - Clean/Replace
D6K2 Track-Type Tractor Machine Systems Ripper Control Linkage - Remove and Install
D6K Track-Type Tractor Fuel System Primary and Secondary Filters - Replace
320GC, 320 and 323 Excavators Machine Systems Stick - Remove and Install
994K Wheel Loader Systems Air Lines
An Improved Sealing Process for Air Conditioning Cover Bolts and Bosses on Certain Series K, Series L, Series M, and Series GC Medium Wheel Loaders {7320} An Improved Sealing Process for Air Conditioning Cover Bolts and Bosses on Certain Series K, Series L, Series M, and Series GC Medium Wheel Loaders {7320}
Scuffing/Scoring May Occur in Bevel Gear Set on Certain 992K and 854K Wheel Dozers {3254, 3256, 3257, 3258} Scuffing/Scoring May Occur in Bevel Gear Set on Certain 992K and 854K Wheel Dozers {3254, 3256, 3257, 3258}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499} Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Recommendations for Calculating Service Brake Shimming During Axle Repairs on Certain Telehandlers {5486} Recommendations for Calculating Service Brake Shimming During Axle Repairs on Certain Telehandlers {5486}
A Procedure to Rework the Air Conditioner Group Filter Cover Is Used for Certain K-Series and M-Series Medium Wheel Loaders {7320, 7342} A Procedure to Rework the Air Conditioner Group Filter Cover Is Used for Certain K-Series and M-Series Medium Wheel Loaders {7320, 7342}
D6K Track-Type Tractor Backup Alarm
D6K Track-Type Tractor Fuel System - Prime
D6K2 Track-Type Tractor Machine Systems Hydraulic Tank - Remove and Install
New One Piece Starter Housing is Used on Certain 824K, 825K, and 826K Machines {1453} New One Piece Starter Housing is Used on Certain 824K, 825K, and 826K Machines {1453}
Instructions for Sorting and Replacing HVAC Actuators {1800, 7320} Instructions for Sorting and Replacing HVAC Actuators {1800, 7320}
Engine Shutdown Procedure on Certain C4.4 Machine Engines {108I, 108U} Engine Shutdown Procedure on Certain C4.4 Machine Engines {108I, 108U}
D6K Track-Type Tractor Tracks
992K Wheel Loader General Information (Power Train System)
D6K Track-Type Tractor Front Idler Position - Check/Adjust
D6K Track-Type Tractor Hydraulic System Oil - Change
D6K Track-Type Tractor Hydraulic System Oil Filter (Winch) - Replace - If Equipped
Improved Hose Routing for the Hydraulic Discharge Screen Hose is now used on Certain D11T Track-Type Tractors {5068} Improved Hose Routing for the Hydraulic Discharge Screen Hose is now used on Certain D11T Track-Type Tractors {5068}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.