D6K Track-Type Tractor Caterpillar


Leaving the Machine

Usage:

D6K2 6S6


Illustration 1g06206558

  1. Use the steps and the handholds when you get off the machine. Face the machine and use both hands. Make sure that the steps are clear of debris before you dismount.

    Note: Do not use the angle cylinders as a step.

  2. Inspect the engine compartment for debris. Clean out any debris and any paper to avoid a fire.

  3. Remove all flammable debris from the front bottom guard through the access panels to reduce a fire hazard. Dispose of the debris properly.

  4. Turn the key for the battery disconnect switch to the OFF position. This action will help to prevent a battery short circuit and the current draw that is made by certain components. When the machine is not operated for an extended period, remove the key from the battery disconnect switch. Removing the key will help to protect the machine from vandalism.

  5. Install all vandalism protection locks and vandalism covers. Lock the doors.

Caterpillar Information System:

Improved Hose Routing for the Hydraulic Discharge Screen Hose is now used on Certain D11T Track-Type Tractors {5068} Improved Hose Routing for the Hydraulic Discharge Screen Hose is now used on Certain D11T Track-Type Tractors {5068}
D6K Track-Type Tractor Hydraulic System Oil Filter (Winch) - Replace - If Equipped
D6K Track-Type Tractor Hydraulic System Oil - Change
D6K Track-Type Tractor Front Idler Position - Check/Adjust
992K Wheel Loader General Information (Power Train System)
D6K Track-Type Tractor Tracks
Engine Shutdown Procedure on Certain C4.4 Machine Engines {108I, 108U} Engine Shutdown Procedure on Certain C4.4 Machine Engines {108I, 108U}
Instructions for Sorting and Replacing HVAC Actuators {1800, 7320} Instructions for Sorting and Replacing HVAC Actuators {1800, 7320}
New One Piece Starter Housing is Used on Certain 824K, 825K, and 826K Machines {1453} New One Piece Starter Housing is Used on Certain 824K, 825K, and 826K Machines {1453}
D6K2 Track-Type Tractor Machine Systems Hydraulic Tank - Remove and Install
D6K Track-Type Tractor Fuel System - Prime
D6K Track-Type Tractor Backup Alarm
D6K Track-Type Tractor Condenser (Refrigerant) - Clean
D6K Track-Type Tractor Cooling System Level - Check
986K Wheel Loader Steering Cylinder Bearings - Lubricate
992K Wheel Loader Features (Electronic Control System)
992K Wheel Loader Electronic Control (Power Train System)
Installation of the 530-2463 Coupler Lines Gp on Certain Wheel Loaders {5057, 5133} Installation of the 530-2463 Coupler Lines Gp on Certain Wheel Loaders {5057, 5133}
D6K Track-Type Tractor Equalizer Bar Center Pin - Lubricate
D6K Track-Type Tractor Fuel System - Fill
D6K Track-Type Tractor Fuel Tank Cap Filter and Strainer - Replace/Clean
992K Wheel Loader Location of Components (Power Train System)
D6K Track-Type Tractor Fuel Tank Water and Sediment - Drain
D6K2 Track-Type Tractor Machine Systems Hydraulic Tank - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.