Hydraulic Tank - Assemble
- 安装垫圈 (39)、弹簧 (43) 和挡圈 (40)。 安装阀 (44)。 安装 O 形密封圈 (41) 和垫片 (45)。 均匀地拧紧螺栓 (42)。
Show/hide table
图 2 g03668659 Show/hide table图 3 g03668519 - 安装 O 形密封圈 (36) 并定位管 (35)。 安装 O 形密封圈 (34) 并定位滤清器底座 (33)。 安装 O 形密封圈 (37) 和螺栓 (38)。 安装螺栓 (32)。
Show/hide table
图 4 g01196722 Show/hide table图 5 g01196720 - 安装护线环 (31)、玻璃 (30) 和板 (29)。 安装护圈 (28)、垫圈 (27) 和螺母 (26)。
Show/hide table
图 6 g01196841 Show/hide table弹簧压缩零件如果安装不当,会伤害人体。
为避免伤害,遵照出版的装配程序,并穿上保护装备。
- 将阀 (25)、弹簧 (24) 和护圈 (23) 安装在主体 (20) 上。
Show/hide table
图 7 g01196840 - 安装主体 (20) 和螺母 (21)。 安装螺塞 (22)。
Show/hide table
图 8 g01196838 - 将管 (16)、阀 (19)、弹簧 (18) 和隔套 (17) 安装到滤网组件 (14) 上。
Show/hide table
图 9 g01196836 Show/hide table弹簧压缩零件如果安装不当,会伤害人体。
为避免伤害,遵照出版的装配程序,并穿上保护装备。
- 将滤网组件 (14) 放置到适当的压具中。 将挡圈 (15) 安装到滤网组件 (14) 上。
Show/hide table
图 10 g01196731 - 将滤清器 (13)、螺栓 (12) 和螺母 (11) 安装到滤网组件 (14) 上。 用手拧紧螺母 (11)。
Show/hide table
图 11 g01196719 - 安装滤网组件 (10) 和护圈 (9)。
Show/hide table
图 12 g01252585 - 安装密封垫 (7)、板 (6)、垫圈 (5) 和螺栓 (4)。 安装滤芯组件 (1) 和传感器 (8)。 安装压力安全阀 (2) 和盖 (3)。
Show/hide table
图 1 | g03668516 |
结束:
- 安装液压油箱。
Caterpillar Information System:
349F and 352F Excavator Machine System Diagnostic Capabilities
Aircraft Loading Fork Attachment (ALFA) ALFA - Inspect
980L Tier 3 Wheel Loader Machine System Fuel Tank - Remove and Install
980L Tier 3 Wheel Loader Engine Supplement Air Cleaner - Remove and Install
<B>Wiper Motor Shaft Breakage on Certain K, L, and M Series Medium Wheel Loaders</B> {7305} <B>Wiper Motor Shaft Breakage on Certain K, L, and M Series Medium Wheel Loaders</B> {7305}
992K Wheel Loader Systems Piston Motor (Hydraulic Fan)
Aircraft Loading Fork Attachment (ALFA) General Maintenance Information
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Swivel - Assemble
980L Tier 3 Wheel Loader Engine Supplement Turbocharger - Remove and Install
C7.1 Engines and Generator Sets ARD Fuel Pressure Is High
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Swivel - Disassemble
990K Wheel Loader Systems Selector and Pressure Control Valve (Transmission)
953K Track-Type Loader Machine Systems Brake Pressure - Test
953K Track-Type Loader Machine Systems Final Hydrostatic Speed - Test
953K Track-Type Loader Machine Systems Steering - Test - Joystick Steering (C-Steer Configuration)
994K Wheel Loader Machine Systems Brake Accumulator - Remove and Install
953K Track-Type Loader Machine Systems Steering - Test - Pedal Steering Configuration
953K Track-Type Loader Machine Systems Steering - Test - Joystick Steering (S-Steer Configuration)
953K Track-Type Loader Machine Systems Piston Pump and Motor Maximum Displacement - Test
953K Track-Type Loader Machine Systems Charge Relief Valve - Test and Adjust
953K Track-Type Loader Machine Systems Crossover Relief Valve - Test and Adjust - Hydrostatic Stall
953K Track-Type Loader Machine Systems Piston Pump Neutral - Test and Adjust
994K Wheel Loader Machine Systems Brake Control Valve (Service) - Remove and Install
PL61 Pipelayer Engine Air Filter Primary Element - Clean/Replace