Main Drive Shaft - Remove and Install
- Remove floor mat assembly (1).
Show/hide table
Illustration 2 g06074093 - Remove bolts (2) and plate assemblies (3).
Show/hide table
Illustration 3 g06099318 - Remove bolts (4) and main drive shaft (5).
Show/hide table
| |
| Illustration 1 | g06074091 |
- Install main drive shaft (5) in the reverse order of removal.
- Tighten bolts (4) to a torque of
60 ± 12 N·m (44 ± 9 lb ft) .
- Tighten bolts (4) to a torque of
Caterpillar Information System:
340F Excavator Machine Systems Joystick and Pedal - Calibrate
340F Excavator Machine Systems Specifications
340F Excavator Machine Systems Gear Pump (Pilot) - Test
340F Excavator Machine Systems Pump Control (Output Flow) - Adjust
340F Excavator Machine Systems Main Pump (Flow) - Test - Hydraulic Power
340F Excavator Machine Systems Relief Valve (Crossover) - Test and Adjust
340F Excavator Machine Systems Travel Motor - Test - Measurement of Case Drain Oil
340F Excavator Machine Systems Swing Bearing Movement - Measure
340F Excavator Machine Systems Relief Valve (Swing) - Test and Adjust
340F Excavator Machine Systems Swing Motor - Test - Measurement of Case Drain Oil
Improve Clearance Adjustment Procedure Between Hose And Damper Of Certain D6R Track-Type Tractors {1380} Improve Clearance Adjustment Procedure Between Hose And Damper Of Certain D6R Track-Type Tractors {1380}
D5R and D6N Track-Type Tractor Machine Systems Refrigerant Condenser Fan and Fan Motor - Remove and Install
340F Excavator Machine Systems Accumulator (Swing) - Test and Charge
D10T2 Fan Pump Update {1387, 5070} D10T2 Fan Pump Update {1387, 5070}
340F Excavator Machine Systems Pump Control (Negative Flow) - Test
340F Excavator Machine Systems Pump Control (Negative Flow) - Adjust
340F Excavator Machine Systems Pump Control (Output Flow) - Test - One Pump Calibration (Optional Test)
340F Excavator Machine Systems Relief Valve (Pilot) - Test and Adjust
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Steering Control - Control System
980M and 982M Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Piston Pump Margin Pressure (Hydraulic Fan) - Test and Adjust
854K Wheel Dozer Windows - Clean
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000} Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
992K Wheel Loader Plate Locations and Film Locations
D11 Main Frame Inspection and Weld Repair Procedure {0679, 7051} D11 Main Frame Inspection and Weld Repair Procedure {0679, 7051}