Fuel Shutoff
The fuel shutoff solenoid is located on the fuel injection pump.
When the fuel shutoff solenoid is activated, the solenoid moves to the "Open" position.
When the fuel shutoff solenoid is deactivated, the solenoid moves to the "Closed" position.
Caterpillar Information System:
C3.3 Industrial Engine Before Starting Engine
G3520B Industrial Engines Start/Stop Control
14L Motor Grader Machine Systems Sideshift Cylinder - Remove and Install
C32 Power Module Additional Messages
2007/07/30 The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
C32 Marine Auxiliary Engines Cat Data Link - Test
CX31 On-Highway Transmission Safety Messages
C32 Marine Auxiliary Engines CAN Data Link - Test
C13 Engine Fuel Pressure Sensor - Remove and Install - Main
C3.3 Industrial Engine Valve Depth - Inspect
C3.3 Industrial Engine Engine Valve Lash - Inspect/Adjust
C3.3 Industrial Engine Compression - Test
2007/08/27 Improvement to the Fuel Injection Pump {1251}
C32 Marine Auxiliary Engine Safety Messages
C32 Power Module Reference Material
2007/10/08 An Improved Aftercooler Core Assembly is Used {1063}
14L Motor Grader Machine Systems Blade Tip Cylinder - Remove and Install
C32 Marine Auxiliary Engines Diagnostic Code Cross Reference
G3408C and G3412C Engines Engine Speed/Timing Sensor - Clean/Inspect
C3.3 Industrial Engine Hoses and Clamps - Inspect/Replace
C32 Marine Auxiliary Engines Speed Control (Switch) - Test
C32 Marine Auxiliary Engines Electrical Power Supply - Test
G3408C and G3412C Engines Fan Drive
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 3463 - FMI 2