2007/10/08 Caterpillar


An Improved Aftercooler Core Assembly is Used {1063}

Usage:

3608 5PG
Engine:
3606 (S/N: 8RB1-UP)
3608 (S/N: 6MC1-UP; 5PG1-UP)
Marine Engine:
C280-6 (S/N: LDL1-UP)

Description of Change: A new aftercooler core is now used. The new aftercooler core is isolated from the block for increased durability and increased reliability.

Adaptable To: The new 299-5625 Aftercooler Core is adaptable to the former 175-2277 Aftercooler Core. The new aftercooler core is adaptable back to first production. Refer to Table 1 for a list of parts. Refer to Illustration 1.

Table 1
Former Parts     Quantity     New Parts     Quantity    
175-1362 Housing     1     7E-3101 Housing     1    
180-2923 O-Ring Seal     1     6V-5063 O-Ring Seal     1    
031-0220 Locking Bolt     30     031-0219 Locking Bolt     38    
175-2277 Aftercooler Core     1     299-5625 Aftercooler Core     1    
139-6857 Plate     2     7H-4412 Spacer     2    
5M-2894 Washer     4     7X-0791 Bolt     2    
6V-0717 Self-Locking Bolt     4     9S-4183 O-Ring Plug     1    
0S-1591 Bolt     4     7E-3103 Seal     1    
    1W-6917 Adapter     2    
3V-3308 Washer 4
123-6256 Adapter 2
6V-1454 O-Ring Seal 4
6V-3908 O-Ring Seal 2
6V-5049 O-Ring Seal 3
9S-4191 O-Ring Plug 3



Illustration 1g01399524

(1) 6V-3908 O-Ring Seal

(2) 6V-1454 O-Ring Seal

(3) 031-0219 Locking Bolt

(4) 3V-3308 Washer

(5) 6V-5049 O-Ring Seal

(6) 9S-4191 O-Ring Plug

(7) 123-6256 Adapter

(8) 1W-6917 Adapter

(9) 7H-4412 Spacer

(10) 7E-3101 Housing

(11) 7X-0791 Bolt

(12) 7E-3103 Seal

(13) 9S-4183 O-Ring Plug

(14) 6V-5063 O-Ring Seal

(15) 299-5625 Aftercooler Core

Caterpillar Information System:

C32 Power Module Reference Material
C32 Marine Auxiliary Engine Safety Messages
2007/08/27 Improvement to the Fuel Injection Pump {1251}
C3.3 Industrial Engine Fuel Shutoff
C3.3 Industrial Engine Before Starting Engine
G3520B Industrial Engines Start/Stop Control
14L Motor Grader Machine Systems Sideshift Cylinder - Remove and Install
C32 Power Module Additional Messages
2007/07/30 The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
C32 Marine Auxiliary Engines Cat Data Link - Test
CX31 On-Highway Transmission Safety Messages
C32 Marine Auxiliary Engines CAN Data Link - Test
14L Motor Grader Machine Systems Blade Tip Cylinder - Remove and Install
C32 Marine Auxiliary Engines Diagnostic Code Cross Reference
G3408C and G3412C Engines Engine Speed/Timing Sensor - Clean/Inspect
C3.3 Industrial Engine Hoses and Clamps - Inspect/Replace
C32 Marine Auxiliary Engines Speed Control (Switch) - Test
C32 Marine Auxiliary Engines Electrical Power Supply - Test
G3408C and G3412C Engines Fan Drive
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 3463 - FMI 2
2007/10/01 New Gas Engines Meet New Emissions Ratings {1278, 191N}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201} Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
345D, 349D and 349D2 Excavators Fuel System - Prime
2007/08/13 New Engine Vision Software Is Now Available {7490, 7620}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.