Water Pump - Remove
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 从冷却系统将冷却液排入合适的容器以便保存或废弃这些冷却液。 请参阅操作和保养手册, "冷却系统冷却液 - 更换"。
Show/hide table
图 1 g01385844 - 拆下卡箍组件 (3)。 将管组件 (2) 从弯头 (5) 上断开。
- 拆下三个螺栓 (7) 和弯头 (5)。
- 拆下螺栓 (4)。
- 将适当起吊设备连在水泵 (1) 上。 水泵 (1) 的重量约为
27 kg (60 lb) 。 拆下螺栓 (6)。 拆下水泵 (1)。
Show/hide table
注意 |
---|
在检查、保养、测试、调整及维修产品时,请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前,请准备好盛接液体用的适当容器。 有关收集和盛接 Cat® 产品油液的合适工具和用品,请参阅专门出版物, PERJ1017, "代理商维修工具目录"。 按照本地法规和要求处置所有油液。 |
Show/hide table
注意 |
---|
泵驱动轴的径向移动将使轴接触到水泵内的瓷密封件。 这可能会损坏瓷密封件。 密封件的损坏会导致泵的泄漏和故障。 禁止泵驱动轴发生径向移动。 |
Show/hide table
图 2 | g00616674 |
水泵剖视图 (1) 瓷密封件 (2) 泵驱动轴 |
使用以下操作水泵的指导原则:
- 禁止泵驱动轴发生径向移动。 不要使用任何会使轴径向移动的工具。
- 不要将水泵置于面上,而要将轴置于面上。
- 不要通过轴操作水泵。
Caterpillar Information System:
C7 and C9 Petroleum Engines Cat Data Link - Test
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Engine Overspeeds
3512C Engine Electrical Connectors
3512C Industrial Engine Water Temperature Regulators - Install
3500C Marine Propulsion Engines Maintenance Interval Schedule
C4.4 (MECH) Industrial Engine and Generator Sets Alternator Belt - Remove and Install - Engines With an Automatic Belt Tensioner
WAVS Installation Guide for Generic Applications{7347, 7348} WAVS Installation Guide for Generic Applications{7347, 7348}
3512C Industrial Engine Water Temperature Regulators - Remove
3512C Engine Component Location
C7 and C9 Petroleum Engines Coolant Temperature Is High
C15 and C18 Generator Set Engines Exhaust Manifold - Remove and Install
3516C Locomotive Engine Emissions General Information
C15 and C18 Generator Set Engines Water Pump - Disassemble
C15 and C18 Generator Set Engines Water Pump - Assemble
C32 Marine Auxiliary Engines Indicator Lamp - Test
3512C Industrial Engine Water Pump - Install
SPT343 Truck Mounted Pumper Maintenance Interval Schedule
3408B and 3408C Industrial and Marine Engines Automatic Timing Advance Unit
2008/08/04 Improvement to Starting Motor Terminal Cover and Connections {1401, 1408, 1453}
3408C and 3412C Marine Engines Fuel Injection Lines
3512B Marine Auxiliary Engine Maintenance Interval Schedule
3512C Industrial Engine Engine Oil Cooler - Remove
C32 Marine Auxiliary Engines Sensor Supply - Test
C18 Engine for Caterpillar Built Machines Electronic Service Tools