General Information
The following warranty information is applicable to all locomotive engines that are certified according to the regulations of the United States Environmental Protection Agency (EPA).
Caterpillar Information System:
3512C Engine System Overview
3516C Locomotive Engine Emissions Emissions Warranty Information
C15 Petroleum Engines Reference Material
C7 and C9 Petroleum Engines Configuration Parameters
2007/09/24 New Software is Available for the Electronic Control Module (ECM) {1901, 1902, 7620}
2011/06/24 Recommended Rocker Arm for Applications with High Compression {1102, 1123}
2007/11/26 Recommended Rocker Arm for Applications with High Compression {1102, 1123}
C15 and C18 Industrial Engines Shutdown Timer (Idle) - Test
C13 and C15 On-highway Engines Oil Contains Fuel
3512C Engine Configuration Parameters
C4.4 (Mech) Marine Generator Set MCS-3 Exhaust Elbow
2007/10/22 New Actuators for the Turbocharger Compressor Bypass Valve are Available {5510}
C15 and C18 Generator Set Engines Exhaust Manifold - Remove and Install
C7 and C9 Petroleum Engines Coolant Temperature Is High
3512C Engine Component Location
3512C Industrial Engine Water Temperature Regulators - Remove
WAVS Installation Guide for Generic Applications{7347, 7348} WAVS Installation Guide for Generic Applications{7347, 7348}
C4.4 (MECH) Industrial Engine and Generator Sets Alternator Belt - Remove and Install - Engines With an Automatic Belt Tensioner
3500C Marine Propulsion Engines Maintenance Interval Schedule
3512C Industrial Engine Water Temperature Regulators - Install
3512C Engine Electrical Connectors
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Engine Overspeeds
C7 and C9 Petroleum Engines Cat Data Link - Test
3512C Industrial Engine Water Pump - Remove