Fan and Fan Guard - Remove and Install
Start By:
- Remove right side engine enclosure.
- Remove engine side guards.
- Remove belt. Refer to Operation and Maintenance Manual,, ""Belts - Inspect/Replace"" to remove and install belt.
Show/hide table
Illustration 1 g03744406 - Remove guard assembly (1).
Show/hide table
Illustration 2 g03745081 - Remove fan assembly (2).
- Install fan assembly (2) in the reverse order of removal.
Caterpillar Information System:
2014/11/05 A New Push Plate Is Now Available For D7E Track-Type Tractors Equipped With a SU Bulldozer {6050, 6060, 6078}
924K, 930K and 938K Wheel Loaders Cooling System Coolant Level - Check
D6N Track-Type Tractor Maintenance Interval Schedule
3500 and 3500B Engines Reference Material
2015/04/28 An Improved Autolube Lines Routing for Front Linkage Is Now used on Certain 966 and 972 Wheel Loaders {6107, 6513, 7510, 7540}
D7E Track-Type Tractor Engine Supplement Radiator - Remove and Install - Separate Circuit
924K, 930K and 938K Wheel Loaders Cooling System Coolant (ELC) - Change
D8R Track-Type Tractor Machine Systems Air Conditioner Lines
926M, 930M and 938M Wheel Loaders Machine Systems Water Valve (Cab Heater) - Assemble
2014/11/05 New Torque Used on Certain 950 GC HVAC Cover Assembly {726A, 734D}
926M, 930M and 938M Wheel Loaders Machine Systems Water Valve (Cab Heater) - Disassemble
D7E Track-Type Tractor Machine Systems Electrical Shutdown and Voltage Discharge
C27 and C32 Engines for Caterpillar Built Machines Intake Manifold Air Differential Temperature Is High
D6R2 Track-Type Tractor Power Train Track - Connect
A New Installation Procedure for the Communication Radio Group Is Now Available for Certain 621K, 623K, 627K, 631K, and 637K Wheel Tractor-Scrapers {733T, 7606} A New Installation Procedure for the Communication Radio Group Is Now Available for Certain 621K, 623K, 627K, 631K, and 637K Wheel Tractor-Scrapers {733T, 7606}
335F CR Excavator C7.1 Engine Supplement Radiator - Remove and Install
926M, 930M and 938M Wheel Loaders Machine Systems Piston Pump (Implement) - Remove and Install
335F CR Excavator C7.1 Engine Supplement Hydraulic Oil Cooler - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Sensor Supply - Test
926M, 930M and 938M Wheel Loaders Machine Systems Piston Pump (Implement) - Assemble
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Fuel Filter Base (Priming Pump) and Water Separator - Remove and Install
926M, 930M and 938M Wheel Loaders Machine Systems Piston Pump (Implement) - Disassemble
2014/11/10 Improved Duo Cone Seals Now Used on AD30 Underground Articulated Trucks {4051}
2014/11/14 Improved Transmission Input Bearings Now Used on AD55B and AD60 Underground Articulated Trucks {3063}