Water Valve (Cab Heater) - Assemble
Assembly Procedure
- Install bushing (9) into electric actuator (7) .
Show/hide table
 | |
| Illustration 1 | g02830720 |
- Connect water valve (8) to electric actuator (7). Install screws (6). Tighten screws (6) to torque of 1.2 ± 0.2 N·m (10.62 ± 1.77 lb in).
Show/hide table
 | |
| Illustration 2 | g02830616 |
- Install tube (5) and the O-ring seal. Install screws (4). Tighten screws (4) to a torque of 2.26 ± 0.20 N·m (20.003 ± 1.770 lb in).
Show/hide table
 | |
| Illustration 3 | g02830538 |
- Install tube (3) and the O-ring seal. Install screws (2). Tighten screws (2) to a torque of 2.26 ± 0.20 N·m (20.003 ± 1.770 lb in).
Show/hide table
 | |
| Illustration 4 | g02830436 |
- Install bracket (1) .
Show/hide table
 | |
| Illustration 5 | g02830428 |
End By: Install the cab heater water valve.
Caterpillar Information System:
2014/11/05 New Torque Used on Certain 950 GC HVAC Cover Assembly {726A, 734D}
926M, 930M and 938M Wheel Loaders Machine Systems Water Valve (Cab Heater) - Disassemble
D7E Track-Type Tractor Machine Systems Electrical Shutdown and Voltage Discharge
D8R Track-Type Tractor Machine Systems Communication Electronic Control Module (Product Link)
D8R Track-Type Tractor Machine Systems Communication Electronic Control Module (Product Link)
D8R Track-Type Tractor Machine Systems Air Conditioner
2014/12/10 Improved Ejector Cylinders Now Used on AD55, AD55B, and AD60 Underground Articulated Ejector Trucks {5305}
2014/12/10 Improved Ejector Cylinder Seals Now Used on AD45B Underground Articulated Ejector Trucks {5305}
C27 and C32 Engines for Caterpillar Built Machines Fuel Temperature Is High
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Is Low
D7E Track-Type Tractor Engine Supplement Engine Trunnion - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Is High
D8R Track-Type Tractor Machine Systems Air Conditioner Lines
924K, 930K and 938K Wheel Loaders Cooling System Coolant (ELC) - Change
D7E Track-Type Tractor Engine Supplement Radiator - Remove and Install - Separate Circuit
2015/04/28 An Improved Autolube Lines Routing for Front Linkage Is Now used on Certain 966 and 972 Wheel Loaders {6107, 6513, 7510, 7540}
3500 and 3500B Engines Reference Material
D6N Track-Type Tractor Maintenance Interval Schedule
924K, 930K and 938K Wheel Loaders Cooling System Coolant Level - Check
2014/11/05 A New Push Plate Is Now Available For D7E Track-Type Tractors Equipped With a SU Bulldozer {6050, 6060, 6078}
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Fan and Fan Guard - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Intake Manifold Air Differential Temperature Is High
D6R2 Track-Type Tractor Power Train Track - Connect
A New Installation Procedure for the Communication Radio Group Is Now Available for Certain 621K, 623K, 627K, 631K, and 637K Wheel Tractor-Scrapers {733T, 7606} A New Installation Procedure for the Communication Radio Group Is Now Available for Certain 621K, 623K, 627K, 631K, and 637K Wheel Tractor-Scrapers {733T, 7606}