New Stop and Tail Lamp Gp Is Now Used on Certain H-Series Medium Wheel Loaders {1432}
- Wheel Loader:
- 950H (S/N: JAD102-UP; M1G2014-UP; MXL1-UP; JLX1-UP)
- 962H (S/N: SSA1-UP; M3G610-UP; MAL1-UP; PCW1-UP)
- 966H (S/N: RYF385-UP; TAL173-UP; BJ61-UP)
- 972H (S/N: GTA1-UP; LCC1-UP; WXZ1-UP)
- 980H (S/N: KZL1-UP)
Description of Change: New Stop and Tail Lamp Gp is now used on certain machines that are listed above. The new Stop and Tail Lamp Gp has improvements that are listed below:
- Improved lens material
- Improved service life
- Improved spring material used in the bulb socket
Adaptable To: The new 415-1086 Stop and Tail Lamp Gp is a direct service replacement for the existing 145-6929 Stop and Tail Lamp Gp. The new Stop and Tail Lamp Gp part number is listed in Table 1.
Show/hide table
New Stop and Tail Lamp Gp     | ||
---|---|---|
New Part Number     | Description     | Former Part Number     |
415-1086     | Stop and Tail Lamp Gp     | 145-6929     |
Show/hide table
New Stop and Tail Lamp Gp     | ||
---|---|---|
Sales Model     | Adaptable Serial Numbers     | Effective Serial Numbers     |
950H     | S/N:JAD102-2274     | S/N:JAD2275-UP     |
S/N:JLX1-478 | S/N:JLX479-UP     | |
S/N:M1G2014-3437 | S/N:M1G3438-UP     | |
S/N:MXL1-941 | S/N:MXL942-UP     | |
962H     | S/N:M3G610-1374     | S/N:M3G1375-UP     |
S/N:MAL1-599 | S/N:MAL600-UP     | |
S/N:PCW1-279 | S/N:PCW280-UP     | |
S/N:SSA1-323 | S/N:SSA324-UP     | |
966H     | S/N:BJ61-600     | S/N:BJ6601-UP     |
S/N:RYF385-1752 | S/N:RYF1753-UP     | |
S/N:TAL173-2775 | S/N:TAL2776-UP     | |
972H     | S/N:GTA1-786     | S/N:GTA787-UP     |
S/N:LCC1-186 | S/N:LCC187-UP     | |
S/N:WXZ1-215 | S/N:WXZ216-UP     | |
980H     | S/N:KZL1-1312     | S/N:KZL1313-UP     |
Caterpillar Information System:
2014/08/08 An Improved Latch Group for the Cab Door Is Now Used on Certain D6N Track-Type Tractors {7301, 7308}
990K Wheel Loader Machine Systems Differential Pinion Preload - Adjust
953K and 963K Track-Type Loaders Engine Oil and Filter - Change
910K and 914K Compact Wheel Loaders Electrohydraulic System Sensor Signal (Analog, Active) - Test
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Sprocket - Inspect
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Exhaust Gas Valve (NRS) - Remove and Install
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Exhaust Cooler (NRS) - Remove and Install
953K and 963K Track-Type Loaders Engine Oil Level - Check
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Electronic Control (Aftertreatment) - Remove and Install
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Temperature Sensor (Catalyst Inlet) - Remove and Install
910K and 914K Compact Wheel Loaders Window Wiper and Wiper Motor (Front) - Remove and Install
621K, 623K and 627K Wheel Tractor-Scrapers Machine Systems Steering Cylinder - Remove and Install
953K and 963K Track-Type Loaders Cab - Tilt
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Inlet Manifold - Remove and Install
D6R2 Track-Type Tractor Fuel Tank Cap Filter and Strainer - Replace/Clean
390F Excavator Machine System Boom - 10.0 m (32.81 ft)
390F Excavator Machine System Bucket Cylinder
390F Excavator Machine System Boom - 7.3 m (23.95 ft)
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Engine Wiring
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Front Wiring
980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Differential and Bevel Gear
390F Excavator Machine System Stick - 5.5 m (18.04 ft)
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Rollover Protective Structure (ROPS)
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Front Wiring