Inlet Manifold - Remove and Install
- Remove panel (1).
Show/hide table
Illustration 2 g03650933 - Loosen clamp (4).
- Remove nut (6).
- Disconnect hose assemblies (5).
- Loosen clamp (7).
- Remove bolts (3) and the washers. Remove inlet manifold (2) and the O-ring seal.
Show/hide table
Illustration 3 g03650980 - Loosen the clamp and remove hose (9).
- Remove bolts (14) and the washers. Remove tube (8) from inlet manifold (2). Remove O-ring seal (11) and dowel (13).
- Remove cup (10).
- Remove plug (12).
Show/hide table
Illustration 4 g03650998 - Remove tube (15) and wave ring (16) from inlet manifold (2).
Show/hide table
Illustration 1 | g03650927 |
Typical example |
- Install inlet manifold (2) in the reverse order of removal.
Caterpillar Information System:
953K and 963K Track-Type Loaders Cab - Tilt
2014/03/21 New Stop and Tail Lamp Gp Is Now Used on Certain H-Series Medium Wheel Loaders {1432}
2014/08/08 An Improved Latch Group for the Cab Door Is Now Used on Certain D6N Track-Type Tractors {7301, 7308}
990K Wheel Loader Machine Systems Differential Pinion Preload - Adjust
953K and 963K Track-Type Loaders Engine Oil and Filter - Change
910K and 914K Compact Wheel Loaders Electrohydraulic System Sensor Signal (Analog, Active) - Test
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Sprocket - Inspect
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Exhaust Gas Valve (NRS) - Remove and Install
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Exhaust Cooler (NRS) - Remove and Install
953K and 963K Track-Type Loaders Engine Oil Level - Check
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Electronic Control (Aftertreatment) - Remove and Install
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Temperature Sensor (Catalyst Inlet) - Remove and Install
D6R2 Track-Type Tractor Fuel Tank Cap Filter and Strainer - Replace/Clean
390F Excavator Machine System Boom - 10.0 m (32.81 ft)
390F Excavator Machine System Bucket Cylinder
390F Excavator Machine System Boom - 7.3 m (23.95 ft)
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Engine Wiring
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Front Wiring
980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Differential and Bevel Gear
390F Excavator Machine System Stick - 5.5 m (18.04 ft)
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Rollover Protective Structure (ROPS)
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Front Wiring
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Differential and Bevel Gear
2014/03/31 An Improved SystemOne Track Cartridge Is Now Used on Certain D5M and D5N Track-Type Tractors {4169, 4170, 4171}