Temperature Sensor (Catalyst Inlet) - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | LOCTITE C5-A Copper Antiseize | - |
- Remove bolts (1) and panel assembly (2).
Show/hide table
Illustration 2 g03652481 - Remove clips (3). Disconnect harness assembly (4).
Show/hide table
Illustration 3 g03652490 View from under machine. - Remove bolts (5) and panel (6).
Show/hide table
Illustration 4 g03652499 View from under machine. - Remove temperature sensor (7).
Show/hide table
Illustration 1 | g03652466 |
- Install temperature sensor (7) in the reverse order of removal.
- Apply Tooling (A) to the threads of temperature sensor (3).
- Tighten temperature sensor (7) to a torque of
45 ± 5 N·m (33 ± 4 lb ft) .
Caterpillar Information System:
910K and 914K Compact Wheel Loaders Window Wiper and Wiper Motor (Front) - Remove and Install
621K, 623K and 627K Wheel Tractor-Scrapers Machine Systems Steering Cylinder - Remove and Install
953K and 963K Track-Type Loaders Engine Crankcase Breather Filter - Replace
980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Differential and Bevel Gear
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Inlet Module (Catalyst) - Remove and Install
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Catalyst (SCR) - Remove and Install
2014/09/26 A New Guardrail Group Is Now Used on Certain D8T Track-Type Tractors {7150, 7256}
525D, 535D, 545D and 555D Wheel Skidders Diagnostic Trouble Codes
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Solenoid Valve (DEF Heater Coolant) - Remove and Install
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Voltage Control (Load Protection) - Remove and Install
2014/09/18 New Engine Enclosure Doors are Now Used on Certain D8R Track-Type Tractors {7263}
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Steering Cylinder
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Electronic Control (Aftertreatment) - Remove and Install
953K and 963K Track-Type Loaders Engine Oil Level - Check
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Exhaust Cooler (NRS) - Remove and Install
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Exhaust Gas Valve (NRS) - Remove and Install
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Sprocket - Inspect
910K and 914K Compact Wheel Loaders Electrohydraulic System Sensor Signal (Analog, Active) - Test
953K and 963K Track-Type Loaders Engine Oil and Filter - Change
990K Wheel Loader Machine Systems Differential Pinion Preload - Adjust
2014/08/08 An Improved Latch Group for the Cab Door Is Now Used on Certain D6N Track-Type Tractors {7301, 7308}
2014/03/21 New Stop and Tail Lamp Gp Is Now Used on Certain H-Series Medium Wheel Loaders {1432}
953K and 963K Track-Type Loaders Cab - Tilt
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Inlet Manifold - Remove and Install