980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Caterpillar


Differential and Bevel Gear

Usage:

980L D8Z


Illustration 1g03650866

Table 1
Specification for 389-1243 Differential and Bevel Gear Gp 
Item  Qty  Part  Specification Description 
9S-4181 O-Ring Plug  Torque to 300 ± 30 N·m (221 ± 22 lb ft)


Illustration 2g03650869
Section A-A

Table 2
Item  Qty  Part  Specification Description 
8T-0370 Bolt  Torque to 1800 ± 200 N·m (1328 ± 148 lb ft)
26  282-0945 Bolt  Torque to 130 ± 10 N·m (96 ± 7 lb ft).
Turn an additional angle of 120 ± 10 degrees. 
356-4200 Bevel Gear  Assembled backlash is 0.36 ± 0.12 mm (0.014 ± 0.005 inch)
12  6V-4429 Bolt  Torque to 300 ± 40 N·m (221 ± 30 lb ft)
6W-4750 Stake Nut  Torque to 1.2 to 3.4 N·m (10.6 to 30.1 lb in)
16  6V-5686 Bolt  Torque to 270 ± 40 N·m (199 ± 30 lb ft)
108-8369 Adjustment Ring  Acceptable overall rolling torque to 4.5 to 6.8 N·m (39.8 to 60.2 lb in)
6V-8132 Bolt  Torque to 900 ± 100 N·m (664 ± 74 lb ft)

Caterpillar Information System:

980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Front Wiring
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Engine Wiring
390F Excavator Machine System Boom - 7.3 m (23.95 ft)
390F Excavator Machine System Bucket Cylinder
390F Excavator Machine System Boom - 10.0 m (32.81 ft)
D6R2 Track-Type Tractor Fuel Tank Cap Filter and Strainer - Replace/Clean
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Inlet Manifold - Remove and Install
953K and 963K Track-Type Loaders Cab - Tilt
2014/03/21 New Stop and Tail Lamp Gp Is Now Used on Certain H-Series Medium Wheel Loaders {1432}
2014/08/08 An Improved Latch Group for the Cab Door Is Now Used on Certain D6N Track-Type Tractors {7301, 7308}
990K Wheel Loader Machine Systems Differential Pinion Preload - Adjust
953K and 963K Track-Type Loaders Engine Oil and Filter - Change
390F Excavator Machine System Stick - 5.5 m (18.04 ft)
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Rollover Protective Structure (ROPS)
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Front Wiring
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Differential and Bevel Gear
2014/03/31 An Improved SystemOne Track Cartridge Is Now Used on Certain D5M and D5N Track-Type Tractors {4169, 4170, 4171}
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Rated Load
950 GC Wheel Loader Machine Systems Bucket - Remove
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Output Transfer Gears
980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Differential and Bevel Gear
953K and 963K Track-Type Loaders Ether Starting Aid Cylinder - Replace
2014/03/31 A New Headliner, Dash, and Platform are Now Used on Certain D8R Track-Type Tractors {7253, 7329, 7451}
953K and 963K Track-Type Loaders Fuel System - Prime
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.