Boom - 7.3 m (23.95 ft)
Show/hide table
Illustration 1 | g03650821 |
Typical example |
Show/hide table
Item | Qty | Part | Specification Description |
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the stick, the upper frame, the bushing, and the cylinder pin bores. After you assemble the bushings, coat all the bores and the bushings with 5P-0960 Grease Cartridge. | |||
1 | 1 | 172-3052 Pin | Diameter is |
2 | 1 | 367-1461 Pin As | Diameter is |
3 | 2 | 244-4150 Bushing | Install the bushing in the bore so that the part number of the bushing is facing outward. |
Bore before assembly is |
|||
Installation depth is |
|||
4 | As required, use the following shims in order to adjust the maximum lateral clearance to |
||
1 | 151-0653 Shim | Thickness is |
|
2 | 093-0076 Shim | Thickness is |
|
1 | 093-0108 Shim | Thickness is |
|
5 | 1 | 364-4923 Pin As | Diameter is |
6 | As required, use the following shims in order to adjust the maximum lateral clearance to |
||
1 | 158-3852 Shim | Thickness is |
|
2 | 093-0077 Shim | Thickness is |
|
1 | 093-0109 Shim | Thickness is |
|
7 | 4 | 113-5950 Lip Type Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install lip type seals so that the lip type seals do not extend beyond the face of the boss. |
Caterpillar Information System:
390F Excavator Machine System Bucket Cylinder
390F Excavator Machine System Boom - 10.0 m (32.81 ft)
D6R2 Track-Type Tractor Fuel Tank Cap Filter and Strainer - Replace/Clean
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Inlet Manifold - Remove and Install
953K and 963K Track-Type Loaders Cab - Tilt
2014/03/21 New Stop and Tail Lamp Gp Is Now Used on Certain H-Series Medium Wheel Loaders {1432}
2014/08/08 An Improved Latch Group for the Cab Door Is Now Used on Certain D6N Track-Type Tractors {7301, 7308}
990K Wheel Loader Machine Systems Differential Pinion Preload - Adjust
953K and 963K Track-Type Loaders Engine Oil and Filter - Change
910K and 914K Compact Wheel Loaders Electrohydraulic System Sensor Signal (Analog, Active) - Test
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Sprocket - Inspect
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Exhaust Gas Valve (NRS) - Remove and Install
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Engine Wiring
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Front Wiring
980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Differential and Bevel Gear
390F Excavator Machine System Stick - 5.5 m (18.04 ft)
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Rollover Protective Structure (ROPS)
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Front Wiring
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Differential and Bevel Gear
2014/03/31 An Improved SystemOne Track Cartridge Is Now Used on Certain D5M and D5N Track-Type Tractors {4169, 4170, 4171}
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Rated Load
950 GC Wheel Loader Machine Systems Bucket - Remove
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Output Transfer Gears
980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Differential and Bevel Gear