Control Group (Implement)
Show/hide table
| |
| Illustration 1 | g03641704 |
Show/hide table
| Specification for 352-1955 Implement Electronic Control Module | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 395-3092 Push Button Switch | Before installing wedge lock and deutsch connector, thread wires through the mounting holes.
Torque to |
| 2 | 1 | 382-4479 Push Button Switch | Before installing wedge lock and deutsch connector, thread wires through the mounting holes.
Torque to |
| 3 | 1 | 350-5141 Bracket | Three screws in the bottom of the joystick handle are to be removed and reused to fasten the bracket in to place.
Torque to |
Caterpillar Information System:
621K, 623K, and 627K Wheel Tractor-Scrapers Systems Suction Fan
Procedure to Rework the Brake Oil Cooler Hoses on AD45B Underground Articulated Trucks{1365, 5057} Procedure to Rework the Brake Oil Cooler Hoses on AD45B Underground Articulated Trucks{1365, 5057}
2013/09/26 Improved Caterpillar Remanufactured Fuel Injectors for Certain C7 and C9 Machine Engines {1251, 1290}
980H Wheel Loader Machine Systems Pilot Valve (Steering) - Remove and Install
980H Wheel Loader Machine Systems Steering Wheel - Remove and Install
D9T Track-Type Tractor Engine Supplement Engine Side Guards - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines ECM Will Not Accept Factory Passwords
C15 and C18 Engines for Caterpillar Built Machines Coolant Temperature Is High
C15 and C18 Engines for Caterpillar Built Machines Coolant Contains Fuel
C15 and C18 Engines for Caterpillar Built Machines Coolant Contains Oil
C15 and C18 Engines for Caterpillar Built Machines Engine Top Speed Is Not Obtained
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Event Codes
D6R Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D6R Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
C4.4 Industrial Engine Mounting and Dismounting
C4.4 Industrial Engine High Pressure Fuel Lines
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Piston Pump (Implement, Steering)
950 GC Wheel Loader Power Train Data Link
950 GC Wheel Loader Power Train Input Components
950 GC Wheel Loader Power Train Output Components
621K, 623K, and 627K Wheel Tractor-Scrapers Systems Hydraulic Cylinder (Bowl)
2013/11/14 An Improved Snubber Pin Is Used on Certain Wheel Skidders {5569}
621K, 623K, and 627K Wheel Tractor-Scrapers Systems Cushion-Hitch Circuit
D8T Track-Type Tractor Machine Systems Dual Tilt Control Valve - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Diagnostic Trouble Codes