C7.1 Engines for Caterpillar Built Machines Caterpillar


Valve Mechanism Cover

Usage:

525D 2L5


Illustration 1g03344508
Typical example

Tighten the bolts for the valve mechanism cover in the sequence that is shown in illustration 1 to the following torque. ... 22 N·m (16 lb ft)

Caterpillar Information System:

901C, 901C2, 902C, 902C2, 903C and 903C2 Compact Wheel Loaders Control Valve (Speed Sensing)
C7.1 Industrial Engine Sensors and Electrical Components
336F MHPU Mobile Hydraulic Power Unit Machine System Specifications Hydraulic Oil Cooler Lines Group
C4.4 Industrial Engine Monitoring System
C4.4 Industrial Engine Gauges and Indicators
C4.4 Industrial Engine Product Lifting
2013/06/04 Selected Hydraulic Parts are now Serviced on Certain H-Series Wheel Tractor-Scrapers {3005, 3081, 3258, 3264, 4257, 5068}
901C, 901C2, 902C, 902C2, 903C and 903C2 Compact Wheel Loaders Hydraulic and Steering System Metering Pump (HMU)
C175-16 Locomotive Engine Oil Contains Coolant
901C, 901C2, 902C, 902C2, 903C and 903C2 Compact Wheel Loaders Hydraulic and Steering System Gear Pump - Steering/Implement/Charge
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Combustion Head - Remove and Install - Clean Emissions Module
901C, 901C2, 902C, 902C2, 903C and 903C2 Compact Wheel Loaders Oscillating Axle (Rear) and Transfer Drive (Hydrostatic)
2013/03/15 New Cylinder Stop Is Now Installed on Certain D3K2, D4K2 and D5K2 Track-Type Tractors with Both Power Pitch Cylinder And Blade Control System {7220}
C7.1 Engines for Caterpillar Built Machines Fuel Injection Nozzles
2013/02/22 An Improved Clevis Pin and Cotter Pin for the Transmission Control Group Are Now Used on Certain D6R and D7R Track-Type Tractors {4122}
Replacement Procedure of the Electronic Filter Control for the Service Hour Meter on Certain Track-Type Tractors{1623, 7478} Replacement Procedure of the Electronic Filter Control for the Service Hour Meter on Certain Track-Type Tractors{1623, 7478}
903C Compact Wheel Loader Work Tool Coupler Operation
C15 and C18 Engines for Caterpillar Built Machines Water Pump
C13, C15, and C18 Tier 4 Final Engines Gear Group (Front)
2013/03/21 A New Procedure for Checking Steering Cylinder and Frame Stop Dimensions is Now Available {4303, 4304, 4330, 7050, 7188}
988H Wheel Loader, 834H Wheel Dozer and, 836H Landfill CompactorTransmission Pump Shaft and Gear Failures {3066, 5073} 988H Wheel Loader, 834H Wheel Dozer and, 836H Landfill CompactorTransmission Pump Shaft and Gear Failures {3066, 5073}
2013/04/15 Improved HMU Steering Lines are Now Available for Certain 950H and 962H Wheel Loaders {4304, 4312, 5057}
335F Excavator Additional Messages
335F Excavator Service Interval Chart
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.