C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Water Pump

Usage:

826K 2L3


图 1g03344797

表 1
技术规格 - 384-4520 水泵总成 
项目  数量  零件  技术规格说明 
9M-3786 O 形密封圈  使用 5P-3975 橡胶润滑剂稍稍润滑孔。 
0S-1591 螺栓  拧紧至扭矩为 39 ± 3 N·m (29 ± 2 lb ft)。 
349-2654 水泵密封件  使用安装工具将水泵密封件压装到水泵轴上,直到固定杯完全座入泵壳体内。 
153-1256 唇形密封  用安装工具安装唇形密封件,使主密封唇朝向水泵驱动齿轮。 压装唇形密封件,直到唇形密封件与壳体内表面齐平。 使用压具安装唇形密封件,不要用手安装唇形密封件。 
135-4928 水泵轴  在防积碳密封件组件底座区的水泵轴直径为 19.100 ± 0.010 mm (0.7520 ± 0.0004 inch)。 

Caterpillar Information System:

903C Compact Wheel Loader Work Tool Coupler Operation
Replacement Procedure of the Electronic Filter Control for the Service Hour Meter on Certain Track-Type Tractors{1623, 7478} Replacement Procedure of the Electronic Filter Control for the Service Hour Meter on Certain Track-Type Tractors{1623, 7478}
2013/02/22 An Improved Clevis Pin and Cotter Pin for the Transmission Control Group Are Now Used on Certain D6R and D7R Track-Type Tractors {4122}
C7.1 Engines for Caterpillar Built Machines Fuel Injection Nozzles
2013/03/15 New Cylinder Stop Is Now Installed on Certain D3K2, D4K2 and D5K2 Track-Type Tractors with Both Power Pitch Cylinder And Blade Control System {7220}
C7.1 Engines for Caterpillar Built Machines Valve Mechanism Cover
901C, 901C2, 902C, 902C2, 903C and 903C2 Compact Wheel Loaders Control Valve (Speed Sensing)
C7.1 Industrial Engine Sensors and Electrical Components
336F MHPU Mobile Hydraulic Power Unit Machine System Specifications Hydraulic Oil Cooler Lines Group
C4.4 Industrial Engine Monitoring System
C4.4 Industrial Engine Gauges and Indicators
C4.4 Industrial Engine Product Lifting
C13, C15, and C18 Tier 4 Final Engines Gear Group (Front)
2013/03/21 A New Procedure for Checking Steering Cylinder and Frame Stop Dimensions is Now Available {4303, 4304, 4330, 7050, 7188}
988H Wheel Loader, 834H Wheel Dozer and, 836H Landfill CompactorTransmission Pump Shaft and Gear Failures {3066, 5073} 988H Wheel Loader, 834H Wheel Dozer and, 836H Landfill CompactorTransmission Pump Shaft and Gear Failures {3066, 5073}
2013/04/15 Improved HMU Steering Lines are Now Available for Certain 950H and 962H Wheel Loaders {4304, 4312, 5057}
335F Excavator Additional Messages
335F Excavator Service Interval Chart
D10T2 Track-Type Tractor Symptom Troubleshooting
C7.1 Engines for Caterpillar Built Machines Fuel Injection Lines
C7.1 Engines for Caterpillar Built Machines Engine Design
D10T2 Track-Type Tractor Emerging Symptom Information
D10T2 Track-Type Tractor Implement System
D10T2 Track-Type Tractor Machine Preparation for Troubleshooting
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.