Visual Inspection
在用测试设备进行测试之前,先对冷却系统进行目视检查。
- 检查冷却系统中的冷却液液位。 必要时添加冷却液。
如果冷却液液位过低,空气就会进入冷却系统中。 冷却系统中的空气会降低冷却液流量。 空气会产生气泡,造成气穴。 冷却液中的气泡也会降低冷却能力。
Show/hide table
溢出的带压液体可能导致人身伤害。 如果压力表上显示有压力值,从散热器上拆卸任何软管之前,应先按压放气阀来释放压力。 |
- 检查冷却液的质量。 冷却液应具有下述性质:
- 颜色应与新冷却液相似
- 气味应与新冷却液相似
- 无污染
- 性质由发动机的操作与保养手册建议。
如果冷却液不具备这些性质,排放并冲洗系统。 根据发动机的操作与保养手册加注冷却系统。
- 颜色应与新冷却液相似
- 检查冷却系统中有无空气。 空气可以通过不同渠道进入冷却系统。 以下条件造成冷却系统中有空气:
- 冷却系统加注不正确
- 燃烧气体泄漏到冷却系统中
燃烧气体可由于以下条件进入系统:内部裂纹, 缸盖损坏 和 缸盖密封垫损坏。
- 冷却系统加注不正确
- 检查散热器。 确保未限制气流。 查看有无下列情况。 必要时进行校正。
- 弯曲翼片
- 折叠芯之间的碎屑
- 风扇叶片损坏
- 弯曲翼片
- 检查压力盖。
如果测压口无法在冷却系统上保持正确的压力,则发动机会变得过热。 冷却系统压力下降会降低水的沸点温度。
- 检查冷却系统软管和卡箍。
通常都会发现因损坏而渗漏的软管。 没有可见渗漏的软管可能在运行期间软化。 软管的软化区域会在使用过程中扭折或压扁。 软管的这些区域会对冷却液流形成阻力。 软管可能在一段时间后开裂。 软管的内侧会老化,软管松动颗粒会对冷却液流形成阻力。
- 检查电动水温调节器。
水温调节器不开启或仅部分开启可能导致过热。
水温调节器不闭合可产生过冷。
- 检查发动机水泵和辅助泵。
发动机运行期间,检查泵排水孔的流体泄露,并且在发动机停转时检查有无泄露。 如果冷却液或者机油从排水孔中泄露,则更换泵。
叶轮损坏的水泵无法泵送足量的冷却液以提供正确的冷却液流量。 这会影响发动机的操作温度。 拆下水泵,检查叶轮是否损坏。 同时检查泵壳体内部有无叶轮产生的刮痕。
Caterpillar Information System:
C175-16 and C175-20 Engines for Off-Highway Trucks General Information (Cooling System)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Rotor Position Sensor - Calibrate
2006/11/13 Improved End - of - Line - Test Fixture for the Product Link Antenna is Now Used {7606}
C27 and C32 Generator Set Engines Camshaft
2006/11/01 An Improved 192-2962 Oil Cooler Core As Is Now Available {1378}
TH31-E61 and TH35-E81 Petroleum Transmissions Oil Filter (Transmission) - Replace - Remote Mounted
C175-16 and C175-20 Engines for Off-Highway Trucks Starting System
C27 and C32 Industrial and Petroleum Engines Flywheel Housing
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel System Description
3500C Marine Propulsion Engines Air Shutoff - Test
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Model View Illustrations
Caterpillar On-Highway Diesel Engine Fluids Recommendations Frequently Asked Questions - Ultra Low Sulfur Diesel (ULSD) Fuel
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Modbus Register Map
C13 and C15 On-highway Engines General Information
2006/11/20 New Tooling for the New Air in Fuel and Fuel Pressure Test Procedures {1261, 1274, 1288, 1714}
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Storage
2011/06/06 Inspect and Rework the 1U-8763 Lifting Bracket Gp {0632, 0701}
C13 and C15 On-highway Engines System Overview
Excessive Oil Leak from Injectors{1290} Excessive Oil Leak from Injectors{1290}
3500C Marine Propulsion Engines CAN Data Link - Test
3500C Marine Propulsion Engines Cat Data Link - Test
C11 and C13 Engines Turbocharger
C4.4 Industrial Engine Piston and Rings
TA22-4WD Agricultural Transmission General Information