Transmission Clutch
Show/hide table
Illustration 1 | g02659418 |
Show/hide table
Specification for 246-8144 Transmission Clutch     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 6     | 363-4541 Spring     | Length under test force is 37.82 mm (1.489 inch). Test force is 93.6 ± 5.6 N (21.0 ± 1.3 lb). Free length after test is 46.90 mm (1.846 inch).     |
2     | Thickness of four new friction discs and three new plates is 26.40 ± 0.56 mm (1.039 ± 0.022 inch):     |
||
4 | 166-0673 Friction Disc     | Thickness is 3.00 ± 0.08 mm (0.118 ± 0.003 inch).     |
|
3 | 166-0675 Plate     | Thickness is 4.80 ± 0.08 mm (0.189 ± 0.003 inch).     |
Caterpillar Information System:
G3304 and G3306 Engines Turbocharger
C0.5, C0.7, C1.1, C1.5, C1.6 and C2.2 Industrial Engines Engine Oil and Filter - Change
3508C, 3512C and 3516C Marine Engines Flywheel Housing - Install
2014/08/08 New Cylinder Head Groups Are Used For Certain 3500 Engines {1100}
3508C, 3512C and 3516C Marine Engines Flywheel Housing - Remove
CAESultra Installation for Wheel Loaders, Wheel Dozers, Landfill Compactors, and Motor Graders {7604, 7620} CAESultra Installation for Wheel Loaders, Wheel Dozers, Landfill Compactors, and Motor Graders {7604, 7620}
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System Starting System
C0.5 and C0.7 Industrial Engines Cooling System Water Temperature Regulator - Replace
C280-6 and C280-8 Engines Engine Lifting Bracket - Remove and Install
TA19-M2WD and TA19-M4WD Agricultural Transmissions Maintenance Interval Schedule
C280-12 and C280–16 Marine Engines Engine Lifting Bracket - Remove and Install
2006/10/16 New Software Available for Product Link {7606, 7620}
C0.5, C0.7, C1.1, C1.5, C1.6 and C2.2 Industrial Engines Basic Engine
345C Excavator Machine System Specifications Swing Gear and Bearing
TA19-M2WD and TA19-M4WD Agricultural Transmissions Relief Valve (Transmission Lubrication)
TA19-M2WD and TA19-M4WD Agricultural Transmissions General Information
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Crankshaft Wear Sleeve (Rear) - Remove and Install
3500C Marine Auxiliary Engines System Overview
3500C Marine Propulsion Engines Component Location
C0.5 and C0.7 Industrial Engines Fuel System Primary Filter/Water Separator - Drain
TA19-M2WD and TA19-M4WD Agricultural Transmissions Visual Inspection
TA19-M2WD and TA19-M4WD Agricultural Transmissions Clutch (Front Wheel Assist)
2006/10/16 New Information Has Been Added in Testing and Adjusting , "Position Switch (Service Brake Pedal) - Adjust" {4269}
C32 Power Module Plate Locations and Film Locations