Engine Lifting Bracket - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 4C-9517 | Plug | 4 |
B | 185-5192 | Stud Protector | 4 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Turn OFF the fuel supply to the engine.
Show/hide table
Illustration 1 g01316070 - Remove the protective cover from the lifting brackets. Mark the location of the lifting brackets.
- Remove tube assemblies (1). Use Tooling (A) to plug the openings in order to prevent debris from entering the fuel system.
- Remove nuts (3).
- Remove lifting bracket (2).
Note: Store the lifting brackets in a clean dry place. Do not install the lifting brackets until it is necessary to lift the engine.
- Install Tooling (B) on each cylinder head stud.
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
B | 185-5192 | Stud Protector | 4 |
C | 5P-3931 | Anti-Seize Compound | - |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove Tooling (B) from each cylinder head stud.
- Install the engine lifting brackets on a C280-06 Engine between the following cylinders:
- Number 1 Cylinder and Number 2 Cylinder
- Number 5 Cylinder and Number 6 Cylinder
- Install the engine lifting brackets on a C280-08 Engine between the following cylinders:
- Number 1 Cylinder and Number 2 Cylinder
- Number 7 Cylinder and Number 8 Cylinder
- Apply Tooling (C) on the threads of the cylinder head studs.
Show/hide table
Illustration 2 g01316070 - Put engine lifting bracket (2) in position on the cylinder head studs. Install nuts (3). Tighten the nuts to a torque of
2150 ± 250 N·m (1590 ± 185 lb ft) .Note: The brackets must be installed so that the pin holes in the clevis are in a horizontal plane.
- Install tube assemblies (1).
- Turn ON the fuel supply.
Caterpillar Information System:
TA19-M2WD and TA19-M4WD Agricultural Transmissions Maintenance Interval Schedule
C280-12 and C280–16 Marine Engines Engine Lifting Bracket - Remove and Install
2006/10/16 New Software Available for Product Link {7606, 7620}
2006/11/13 New Software is Now Available for EMCP 3.1, EMCP 3.2, and EMCP 3.3 {4490, 7620}
C0.5 and C0.7 Industrial Engines Fuel Injector - Test/Change
TA19-M2WD and TA19-M4WD Agricultural Transmissions Transmission Suction Screen - Clean
TA19-M2WD and TA19-M4WD Agricultural Transmissions Transmission Oil Level - Check
Bench Test Procedure For A TH48FT - E70 Oil Field Transmission {3030} Bench Test Procedure For A TH48FT - E70 Oil Field Transmission {3030}
TA19-M2WD and TA19-M4WD Agricultural Transmissions Transmission Oil - Change
TA19-M2WD and TA19-M4WD Agricultural Transmissions Breather (Transmission) - Clean
TA19-M2WD and TA19-M4WD Agricultural Transmissions Capacities (Refill)
TA19-M2WD and TA19-M4WD Agricultural Transmissions Lifting and Tying Down the Transmission
C0.5 and C0.7 Industrial Engines Cooling System Water Temperature Regulator - Replace
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System Starting System
CAESultra Installation for Wheel Loaders, Wheel Dozers, Landfill Compactors, and Motor Graders {7604, 7620} CAESultra Installation for Wheel Loaders, Wheel Dozers, Landfill Compactors, and Motor Graders {7604, 7620}
3508C, 3512C and 3516C Marine Engines Flywheel Housing - Remove
2014/08/08 New Cylinder Head Groups Are Used For Certain 3500 Engines {1100}
3508C, 3512C and 3516C Marine Engines Flywheel Housing - Install
C0.5, C0.7, C1.1, C1.5, C1.6 and C2.2 Industrial Engines Engine Oil and Filter - Change
G3304 and G3306 Engines Turbocharger
TA19-M2WD and TA19-M4WD Agricultural Transmissions Transmission Clutch
C0.5, C0.7, C1.1, C1.5, C1.6 and C2.2 Industrial Engines Basic Engine
345C Excavator Machine System Specifications Swing Gear and Bearing
TA19-M2WD and TA19-M4WD Agricultural Transmissions Relief Valve (Transmission Lubrication)