Lifting and Tying Down the Transmission
Show/hide table
Illustration 1 | g01315582 |
The weight of the TA19 with a dry sump is approximately 1250 kg (2750 lb) for the two-wheel drive transmission and the weight of the four-wheel drive version is 1340 kg (2950 lb).
For lifting objects, use properly rated cables and properly rated slings. Position the crane for a level lift of the transmission.
Lifting points (1) can be used to tie down the transmission. Install the tie-downs at several locations. Place blocks under the transmission case in order to provide stable support for the transmission.
Check the appropriate laws that govern the weight of the load.
Consult your Caterpillar dealer for shipping instructions for your transmission.
Caterpillar Information System:
C280-6 and C280-8 Engines Exhaust Manifold - Remove and Install - C280-8
C280-6 and C280-8 Engines Exhaust Manifold - Remove and Install - C280-6
C280-12 and C280–16 Marine Engines Exhaust Manifold - Remove and Install - C280-16
C280-12 and C280–16 Marine Engines Exhaust Manifold - Remove and Install - C280-12
TA19-M2WD and TA19-M4WD Agricultural Transmissions Transmission Control
3512C and 3516C Marine Auxiliary and Generator Set Engines Air Shutoff - Test - Engines That Are Equipped with ADEM II or ADEM III Engine Control Modules (If equipped)
3512C and 3516C Marine Auxiliary and Generator Set Engines Maintenance Recommendations
3512C and 3516C Marine Auxiliary and Generator Set Engines Safety Messages
Installation Instructions For UPS 1200 With Paralleling{4480} Installation Instructions For UPS 1200 With Paralleling{4480}
3608 Engine Crankshaft - Install
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Serial Number Plate
3608 Engine Crankshaft - Remove
TA19-M2WD and TA19-M4WD Agricultural Transmissions Capacities (Refill)
TA19-M2WD and TA19-M4WD Agricultural Transmissions Breather (Transmission) - Clean
TA19-M2WD and TA19-M4WD Agricultural Transmissions Transmission Oil - Change
Bench Test Procedure For A TH48FT - E70 Oil Field Transmission {3030} Bench Test Procedure For A TH48FT - E70 Oil Field Transmission {3030}
TA19-M2WD and TA19-M4WD Agricultural Transmissions Transmission Oil Level - Check
TA19-M2WD and TA19-M4WD Agricultural Transmissions Transmission Suction Screen - Clean
C0.5 and C0.7 Industrial Engines Fuel Injector - Test/Change
2006/11/13 New Software is Now Available for EMCP 3.1, EMCP 3.2, and EMCP 3.3 {4490, 7620}
2006/10/16 New Software Available for Product Link {7606, 7620}
C280-12 and C280–16 Marine Engines Engine Lifting Bracket - Remove and Install
TA19-M2WD and TA19-M4WD Agricultural Transmissions Maintenance Interval Schedule
C280-6 and C280-8 Engines Engine Lifting Bracket - Remove and Install