1986/07/28 Caterpillar


Extended Oil And Oil Filter Change Intervals {1300,1318}

Usage:


3304 Natural Gas Engines

Description of Change: Changes have been made to the 3304 Natural Gas Engine to increase the engine oil and oil filter element change interval. The change is possible because an oil pan with more capacity and larger oil filter element is now used.

The new engine oil and filter element change interval is 750 SMU. The refill capacity for the 3304 Engine including the oil filter element is 31.2 liters (8.25 U.S. gal).

Adaptable As: The changes to increase the engine oil and oil filter element change intervals are in effect with 3304 Natural Gas Engines (37Y1019) and can be adapted to all 3304 Natural Gas Engines. The parts shown in the charts, when used together, can be used to increase the engine oil and oil filter element change intervals.


Location of the S1591 Bolt and 5M2894 Washer.

Caterpillar Information System:

1986/07/28 Oil Cooler Gasket Has Improved Material {1300,1378}
1986/07/28 SIMS Reports Must Be Correctly Completed To Be Entered In Data System {0331,0336}
1986/07/28 Less Expensive 12-Volt Converter Available For Radios {1400,1401}
1986/07/28 Material Safety Data Sheets For Parts Sold By Caterpillar That Contain Hazardous Chemicals {0353,0680}
1986/07/28 Change Wiring To Prevent Low Oil Pressure Shutdown Immediately After Start-Up {4450}
1986/07/14 Use Care When Cleaning Clutch Discs{3155}
1986/07/07 Improved 8T3216 Anvil Assembly, Part Of Track Shop Press Tooling {0729,0700}
1986/07/07 New Start Switch Used {1416,1453}
1986/07/07 New Engine Timing Indicator Group Available {0781,0782}
1986/07/07 Larger Capacity Air Conditioner Receivers (Dryers) Available With Quick Disconnect Fittings {1802,7320}
1986/07/07 New Flexible Coupling Used {3252,3303,3300}
1986/07/07 Brushless Alternators May Not Charge In Certain Conditions {1405,1406}
1986/07/28 Water Vent Line Improved To Withstand Engine Vibrations {1070,1380}
1986/08/04 New Pressure Gauges (With Tonnage Scales) Available For Caterpillar Service Tool Manual And Electric Hydraulic Pumps {0770,0615,0616}
1986/08/18 Inspection And Replacement Of Fluid Conductors{1274,1307,5057,7554}
1986/08/18 Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/08/18 Silicone Water Seal Available{1101}
1986/09/01 Bearing Information For SR4 Generators{4471}
1986/09/01 New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01 Inspection And Replacement Of Parts In The Portable Track Repair Groups{0729,4171}
1986/09/01 Do Not Strike Pin Ends To Loosen Sealed And Lubricated Track{4175}
1986/09/01 New 9W6370 Electronic Speed Switch Adapter Cable Available For Use With 8T5200 Signal Generator/Counter Group{0600}
1986/09/01 Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/08 Product Support Literature For Military Machines{7567}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.