Speed Sensor - Clean/Inspect
Show/hide table
Illustration 1 | g00293337 |
Typical speed sensor |
- Remove the speed sensor from the flywheel housing. Check the condition of the end of the speed sensor. Check for signs of wear and contaminants.
- Clean the metal shavings and other debris from the face of the magnet.
- Install the speed sensor according to the information in the Service Manual, "Specifications".
Caterpillar Information System:
3500 Engines Fumes Disposal System
3516C Locomotive Engine Engine Air Cleaner Service Indicator - Inspect
3516C Locomotive Engine Starting Motor - Inspect
2006/08/21 A Improved Alternator Guard in Used {7174}
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System Service Tools
C280-12 and C280–16 Marine Engines Fuel Injector - Install
C280-12 and C280–16 Marine Engines Fuel Injector - Remove
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 1823 - FMI 04
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 1823 - FMI 03
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 1824 - FMI 04
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 1824 - FMI 03
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 1825 - FMI 04
C280-12 and C280–16 Marine Engines Cylinder Head - Remove
C0.5, C0.7, C1.1, C1.5, C1.6 and C2.2 Industrial Engines Fuel System - Prime
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Solenoid and Relief Valve (Output Transfer Gears) - Drop Box) (12 Volt
2006/09/11 A New Clamp for the Air Cleaner is Used {1051}
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Actuator (Air Conditioner Control)
2007/10/01 Correct Installation Procedure for the 235-1448 Tube As {1304, 1306}
CX31 On-Highway Transmission Power Train Pump Drive - Remove - Rear PTO Shaft
2006/09/04 A New Torque Specification For the Cap Nuts on Fuel Injectors is Now Used {1120, 1290, 1408}
2006/10/23 Improved Head Gasket {1100, 1124}
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys 4 Wire Out Voltage - Calibrate
C175-16 Locomotive Engine ECM - Replace
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys In Current - Calibrate