C4.4 Engines for Caterpillar Built Machines Caterpillar


Atmospheric Pressure Sensor

Usage:

316E L DZW

Specifications

Table 1
Specifications for 320-3063 Pressure Sensor    
Callout     Part Number     Part Name     Specification Description    
3     320-3063     Pressure Sensor     Torque to...................
10 N·m (89 lb in)
   

Removal Procedure




    Illustration 1g02433676

  1. Slide locking tab (2) into the unlocked position. Disconnect harness assembly (1) .

  1. Remove atmospheric pressure sensor (3) from the bracket.

Installation Procedure




    Illustration 2g02433676

  1. Install atmospheric pressure sensor (3). Tighten atmospheric pressure sensor (3) to a torque of 10 N·m (89 lb in).

    Note: The atmospheric pressure sensor should not be installed with an O-ring seal.

  1. Connect harness assembly (1) to atmospheric pressure sensor (3). Slide locking tab (2) into the locked position.

Caterpillar Information System:

C4.4 Engines for Caterpillar Built Machines Camshaft Position Sensor
C4.4 Engines for Caterpillar Built Machines Crankshaft Position Sensor
C4.4 Engines for Caterpillar Built Machines Coolant Temperature Sensor
C4.4 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor
2011/10/03 Improved Waste Handling Arrangement (If Equipped) is Now Available for Certain Track-Type Tractors {7000}
C4.4 Engines for Caterpillar Built Machines Boost Pressure Sensor
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0600 - FMI 04
2011/10/27 Improved Waste Handling Arrangements (If Equipped) are Now Available for Certain Track-Type Tractors {7000}
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0600 - FMI 03
C4.4 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor
C4.4 Engines for Caterpillar Built Machines Alternator Belt
D11T Track-Type Tractor Restricted Visibility
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0779 - FMI 03
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0779 - FMI 04
854K Wheel Dozer Field Assembly Procedure {7000, 7960} 854K Wheel Dozer Field Assembly Procedure {7000, 7960}
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0800 - FMI 09
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0800 - FMI 14
D9T Track-Type Tractor Engine Supplement Water Pump - Remove and Install
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 1052 - FMI 03
992K Wheel Loader Electrohydraulic System Ride Control Accumulator - Test and Charge
992K Wheel Loader Electrohydraulic System Hydraulic Fan Speed - Test and Adjust
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 2357 - FMI 03
992K Wheel Loader Electrohydraulic System Piston Pump Cutoff Pressure (Hydraulic Fan) - Test and Adjust
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 2357 - FMI 04
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.