Crankshaft Position Sensor
Specifications
Show/hide table
Specifications for 238-0120 Speed Sensor Gp     | |||
Callout     | Part Number     | Part Name     | Specification Description     |
3     | 238-0120     | Speed Sensor Gp     | Torque to................... 14 N·m (124 lb in)     |
Removal Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Slide locking tab (2) into the unlocked position. Disconnect harness assembly (1) from crankshaft position sensor (3) .
Show/hide table
Illustration 1 | g02449496 |
- Remove bolt (4) from the cylinder block.
- Carefully remove crankshaft position sensor (3) from the cylinder block.
Note: Do not use a lever to remove the crankshaft position sensor from the cylinder block.
- Remove O-ring seal (5) from crankshaft position sensor (3) .
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install a new O-ring seal (5) to crankshaft position sensor (3) .
Note: Do not lubricate the O-ring seal.
Show/hide table
Illustration 2 | g02449496 |
- Install crankshaft position sensor (3) to the cylinder block. Install bolt (4) and tighten the bolt to a torque of 14 N·m (124 lb in).
- Connect harness assembly (1) to crankshaft position sensor (3). Slide locking tab (2) into the locked position.
Caterpillar Information System:
C4.4 Engines for Caterpillar Built Machines Coolant Temperature Sensor
C4.4 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor
2011/10/03 Improved Waste Handling Arrangement (If Equipped) is Now Available for Certain Track-Type Tractors {7000}
C4.4 Engines for Caterpillar Built Machines Boost Pressure Sensor
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0600 - FMI 04
2011/10/27 Improved Waste Handling Arrangements (If Equipped) are Now Available for Certain Track-Type Tractors {7000}
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0600 - FMI 03
C4.4 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor
C4.4 Engines for Caterpillar Built Machines Alternator Belt
D11T Track-Type Tractor Restricted Visibility
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0494 - FMI 13
C4.4 Engines for Caterpillar Built Machines Idler Pulley - Flat Idler Pulley
C4.4 Engines for Caterpillar Built Machines Camshaft Position Sensor
C4.4 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0779 - FMI 03
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0779 - FMI 04
854K Wheel Dozer Field Assembly Procedure {7000, 7960} 854K Wheel Dozer Field Assembly Procedure {7000, 7960}
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0800 - FMI 09
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0800 - FMI 14
D9T Track-Type Tractor Engine Supplement Water Pump - Remove and Install
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 1052 - FMI 03
992K Wheel Loader Electrohydraulic System Ride Control Accumulator - Test and Charge
992K Wheel Loader Electrohydraulic System Hydraulic Fan Speed - Test and Adjust
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 2357 - FMI 03