Engine Oil Pressure Sensor
Specifications
Show/hide table
| Specifications for 320-3060 Pressure Sensor | |||
| Callout | Part Number | Part Name | Specification Description |
| 3 | 320-3060 | Pressure Sensor | Torque to................... 10 N·m (89 lb in) |
Removal Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Dispose of all fluids according to local regulations and mandates. |
- Slide locking tab (2) into the unlocked position. Disconnect harness assembly (1) from engine oil pressure sensor (3).
Show/hide table
 | |
| Illustration 1 | g02476247 |
- Use a deep socket to remove engine oil pressure sensor (3) from the cylinder block.
- Remove O-ring seal (4) from engine oil pressure sensor (3) .
Installation Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install a new O-ring seal (4) onto engine oil pressure sensor (3).
Note: Do not lubricate the O-ring seal.
Show/hide table
| | |
| Illustration 2 | g02476247 |
- Use a deep socket to install engine oil pressure sensor (3) to the cylinder block. Tighten the engine oil pressure sensor to a torque of 10 N·m (89 lb in).
- Connect harness assembly (1) to engine oil pressure sensor (3) .
- Slide locking tab (2) into the locked position.
- If necessary, fill the engine oil pan to the correct level that is indicated on the engine oil level gauge. Refer to Operation and Maintenance Manual, "Engine Oil Level - Check" for the correct procedure.
Caterpillar Information System:
2011/10/03 Improved Waste Handling Arrangement (If Equipped) is Now Available for Certain Track-Type Tractors {7000}
C4.4 Engines for Caterpillar Built Machines Boost Pressure Sensor
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0600 - FMI 04
2011/10/27 Improved Waste Handling Arrangements (If Equipped) are Now Available for Certain Track-Type Tractors {7000}
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0600 - FMI 03
C4.4 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor
C4.4 Engines for Caterpillar Built Machines Alternator Belt
D11T Track-Type Tractor Restricted Visibility
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0494 - FMI 13
C4.4 Engines for Caterpillar Built Machines Idler Pulley - Flat Idler Pulley
D9T Track-Type Tractor Power Train Brake Control Valve - Install
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0494 - FMI 06
C4.4 Engines for Caterpillar Built Machines Coolant Temperature Sensor
C4.4 Engines for Caterpillar Built Machines Crankshaft Position Sensor
C4.4 Engines for Caterpillar Built Machines Camshaft Position Sensor
C4.4 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0779 - FMI 03
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0779 - FMI 04
854K Wheel Dozer Field Assembly Procedure {7000, 7960} 854K Wheel Dozer Field Assembly Procedure {7000, 7960}
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0800 - FMI 09
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0800 - FMI 14
D9T Track-Type Tractor Engine Supplement Water Pump - Remove and Install
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 1052 - FMI 03
992K Wheel Loader Electrohydraulic System Ride Control Accumulator - Test and Charge