Camshaft Position Sensor
Specifications
Show/hide table
Specifications for 238-0120 Speed Sensor Gp     | |||
Callout     | Part Number     | Part Name     | Specification Description     |
3     | 238-0120     | Speed Sensor Gp     | Torque to................... 14 N·m (124 lb in)     |
Removal Procedure
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Slide locking tab (2) into the unlocked position. Disconnect harness assembly (1) from camshaft position sensor (3) .
Show/hide table
Illustration 1 | g02437917 |
- Remove bolt (2). Carefully remove camshaft position sensor (3) from the cylinder block.
Note: Do not use a lever to remove the camshaft position sensor.
- Remove O-ring seal (5) from camshaft position sensor (3) .
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install a new O-ring seal (5) to camshaft position sensor (3) .
Note: Do not lubricate the O-ring seal.
Show/hide table
Illustration 2 | g02437917 |
- Install camshaft position sensor (3) to the cylinder block. Install bolt (4) and tighten the bolt to a torque of 14 N·m (124 lb in).
- Connect harness assembly (1) to camshaft position sensor (3). Slide locking tab (2) into the locked position.
Caterpillar Information System:
C4.4 Engines for Caterpillar Built Machines Crankshaft Position Sensor
C4.4 Engines for Caterpillar Built Machines Coolant Temperature Sensor
C4.4 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor
2011/10/03 Improved Waste Handling Arrangement (If Equipped) is Now Available for Certain Track-Type Tractors {7000}
C4.4 Engines for Caterpillar Built Machines Boost Pressure Sensor
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0600 - FMI 04
2011/10/27 Improved Waste Handling Arrangements (If Equipped) are Now Available for Certain Track-Type Tractors {7000}
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0600 - FMI 03
C4.4 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor
C4.4 Engines for Caterpillar Built Machines Alternator Belt
D11T Track-Type Tractor Restricted Visibility
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0494 - FMI 13
C4.4 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0779 - FMI 03
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0779 - FMI 04
854K Wheel Dozer Field Assembly Procedure {7000, 7960} 854K Wheel Dozer Field Assembly Procedure {7000, 7960}
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0800 - FMI 09
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 0800 - FMI 14
D9T Track-Type Tractor Engine Supplement Water Pump - Remove and Install
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 1052 - FMI 03
992K Wheel Loader Electrohydraulic System Ride Control Accumulator - Test and Charge
992K Wheel Loader Electrohydraulic System Hydraulic Fan Speed - Test and Adjust
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 2357 - FMI 03
992K Wheel Loader Electrohydraulic System Piston Pump Cutoff Pressure (Hydraulic Fan) - Test and Adjust