D6N Track-Type Tractor Caterpillar


Recoil Spring Compartment Oil Level - Check

Usage:

D6N LGP PBA

------ WARNING! ------

Hot oil and components can cause personal injury.

Do not allow hot oil or components to contact skin.




    Illustration 1g03536146

  1. Remove all of the debris around the cover plate on the top of the track roller frame.

  2. Remove the cover plate for the oil filler. Observe the level of the oil.


    Illustration 2g00100922

  3. Maintain the oil level to the level mark on the cast surface.

  4. Install the cover plate.

  5. Repeat the procedure for the other recoil compartment.

Caterpillar Information System:

Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180} Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
980K Wheel Loader Electrohydraulic System MID 082 - CID 2113 - FMI 03
D6N Track-Type Tractor Pivot Shaft Oil Level - Check
950K, 962K, 966K, 972K and 980K Wheel Loaders Monitoring System Using the Operator Monitor to Determine Diagnostic Codes
980K Wheel Loader Electrohydraulic System MID 082 - CID 2285 - FMI 08
D7E Track-Type Tractor Monitoring System Diagnostic Code List
C13, C15, and C18 Tier 4 Interim Engines Data Link - Test
992K Wheel Loader Machine Systems Cab - Remove
980K Wheel Loader Electrohydraulic System MID 082 - CID 2285 - FMI 04
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Brake System Air - Purge
D6N Track-Type Tractor Hydraulic System Oil Sample - Obtain
D6N Track-Type Tractor Hydraulic System Oil Level - Check
D6N Track-Type Tractor Winch Cable - Inspect
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems General Information (Implement Hydraulic System)
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Brake Accumulator Charging Valve - Test
D11R and D11T Pinion and Bevel Gear History{3011, 3256} D11R and D11T Pinion and Bevel Gear History{3011, 3256}
2011/05/12 The Front Differential Housing May Require Machining Prior to Assembly On Certain AD55B Underground Articulated Trucks {3260}
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Service Brake System Pressure - Test
950M, 962M, 950M Z and 962M Z Wheel Loaders Evaporator Coil and Heater Coil - Remove and Install
980K Wheel Loader Electrohydraulic System MID 082 - CID 0427 - FMI 03
Installation Instructions for 368-6422, 368-6423, 368-6424 Coupler Lines Gp for 966K and 972K Wheel Loaders {0679, 1408, 5057, 5133, 6129} Installation Instructions for 368-6422, 368-6423, 368-6424 Coupler Lines Gp for 966K and 972K Wheel Loaders {0679, 1408, 5057, 5133, 6129}
Installation Procedure of the Coupler Lines Gp for Certain 950K and 962K Wheel Loaders{1408, 5057, 5133, 6129} Installation Procedure of the Coupler Lines Gp for Certain 950K and 962K Wheel Loaders{1408, 5057, 5133, 6129}
Repair Procedures for the Exterior Mirror Mounting Bracket {0679, 7301, 7319} Repair Procedures for the Exterior Mirror Mounting Bracket {0679, 7301, 7319}
D6N Track-Type Tractor Power Angling Tilt Pins-Lubricate
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.