D7E Track-Type Tractor Monitoring System Caterpillar


Diagnostic Code List

Usage:

D7E MDB
Use the Cat® Electronic Technician (Cat ET) Service Tool to determine the diagnostic codes for the ECM. After determining the diagnostic codes, refer to the corresponding test procedure for more information. Perform the procedure that corresponds to the diagnostic code (CID and FMI). The following table is a list of possible diagnostic codes for the ECM.

Table 1
Diagnostic Codes For Dash Cluster (MID 053) (1)    
For troubleshooting, refer to the procedure with the same CID and FMI Number.    
CID / FMI     Description    
CID 0247     J1939 Data Link    
FMI 09     Abnormal update    
FMI 14     Parameter failures    
CID 0271     Action Alarm    
FMI 03     Voltage above normal    
FMI 05     Current below normal    
FMI 06     Current above normal    
( 1 ) For the Dash Cluster, the MID is 053. This table pertains only to diagnostic codes with a MID of 053.

Caterpillar Information System:

C13, C15, and C18 Tier 4 Interim Engines Data Link - Test
992K Wheel Loader Machine Systems Cab - Remove
980K Wheel Loader Electrohydraulic System MID 082 - CID 2285 - FMI 04
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Brake System Air - Purge
D6N Track-Type Tractor Hydraulic System Oil Sample - Obtain
D6N Track-Type Tractor Hydraulic System Oil Level - Check
980K Wheel Loader Electrohydraulic System MID 082 - CID 2285 - FMI 03
980K Wheel Loader Electrohydraulic System MID 082 - CID 2285 - FMI 13
D6N Track-Type Tractor Hydraulic System Oil Filter - Replace
980K Wheel Loader Electrohydraulic System MID 082 - CID 2286 - FMI 13
980K Wheel Loader Electrohydraulic System MID 082 - CID 2286 - FMI 08
D6N Track-Type Tractor Fuel Tank Water and Sediment - Drain
980K Wheel Loader Electrohydraulic System MID 082 - CID 2285 - FMI 08
950K, 962K, 966K, 972K and 980K Wheel Loaders Monitoring System Using the Operator Monitor to Determine Diagnostic Codes
D6N Track-Type Tractor Pivot Shaft Oil Level - Check
980K Wheel Loader Electrohydraulic System MID 082 - CID 2113 - FMI 03
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180} Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
D6N Track-Type Tractor Recoil Spring Compartment Oil Level - Check
D6N Track-Type Tractor Winch Cable - Inspect
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems General Information (Implement Hydraulic System)
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Brake Accumulator Charging Valve - Test
D11R and D11T Pinion and Bevel Gear History{3011, 3256} D11R and D11T Pinion and Bevel Gear History{3011, 3256}
2011/05/12 The Front Differential Housing May Require Machining Prior to Assembly On Certain AD55B Underground Articulated Trucks {3260}
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Service Brake System Pressure - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.