Pivot Shaft Oil Level - Check
Show/hide table
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |
- Remove the oil plug on one side of the machine.
- Check the pivot shaft oil level. The oil level should be at the bottom of the threaded hole.
- If necessary, add oil in order to bring the oil level up to the bottom of the threaded hole.
- Repeat the procedure on the other side of the machine.
Show/hide table
Illustration 1 | g03536134 |
The oil plugs for the pivot shafts are located on both sides of the machine. |
Caterpillar Information System:
950K, 962K, 966K, 972K and 980K Wheel Loaders Monitoring System Using the Operator Monitor to Determine Diagnostic Codes
980K Wheel Loader Electrohydraulic System MID 082 - CID 2285 - FMI 08
D7E Track-Type Tractor Monitoring System Diagnostic Code List
C13, C15, and C18 Tier 4 Interim Engines Data Link - Test
992K Wheel Loader Machine Systems Cab - Remove
980K Wheel Loader Electrohydraulic System MID 082 - CID 2285 - FMI 04
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Brake System Air - Purge
D6N Track-Type Tractor Hydraulic System Oil Sample - Obtain
D6N Track-Type Tractor Hydraulic System Oil Level - Check
980K Wheel Loader Electrohydraulic System MID 082 - CID 2285 - FMI 03
980K Wheel Loader Electrohydraulic System MID 082 - CID 2285 - FMI 13
D6N Track-Type Tractor Hydraulic System Oil Filter - Replace
980K Wheel Loader Electrohydraulic System MID 082 - CID 2113 - FMI 03
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180} Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
D6N Track-Type Tractor Recoil Spring Compartment Oil Level - Check
D6N Track-Type Tractor Winch Cable - Inspect
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems General Information (Implement Hydraulic System)
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Brake Accumulator Charging Valve - Test
D11R and D11T Pinion and Bevel Gear History{3011, 3256} D11R and D11T Pinion and Bevel Gear History{3011, 3256}
2011/05/12 The Front Differential Housing May Require Machining Prior to Assembly On Certain AD55B Underground Articulated Trucks {3260}
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Service Brake System Pressure - Test
950M, 962M, 950M Z and 962M Z Wheel Loaders Evaporator Coil and Heater Coil - Remove and Install
980K Wheel Loader Electrohydraulic System MID 082 - CID 0427 - FMI 03
Installation Instructions for 368-6422, 368-6423, 368-6424 Coupler Lines Gp for 966K and 972K Wheel Loaders {0679, 1408, 5057, 5133, 6129} Installation Instructions for 368-6422, 368-6423, 368-6424 Coupler Lines Gp for 966K and 972K Wheel Loaders {0679, 1408, 5057, 5133, 6129}