 | |
| Illustration 1 | g03724847 |
 | |
| Illustration 2 | g02803518 |
Lubricate the Variable Pitch Angle Tilt Blade at every 50 hour interval or weekly.
Apply lubricant to the grease fittings for the head end of the lift cylinder (1) and the rod end of the lift cylinder (2) . Be sure to lubricate the left and right side lift cylinders.
Apply lubricant to the remote grease fitting for the head end of the angle cylinder (3) . Also apply lubricant to the grease fitting for the rod end of the angle cylinder (5) . Be sure to lubricate the left and right side angle cylinders. Lubricate blade trunnion (5A) .
Apply lubricant to the grease fittings for the rod end of the tilt cylinder (6) and the head end of the tilt cylinder (7) .
Lubricate the end bearings on stabilizer link (A) and under the cover of stabilizer link (A) (two points).
Foldable Blade, If Equipped
 | |
| Illustration 3 | g03680429 |
Work position of foldable blade | |
 | |
| Illustration 4 | g03681972 |
Folded position | |
Apply lubricant to grease fittings (8) for the top and bottom pins for foldable blade (9) , if equipped.
Note: Grease fittings (8) for the foldable blade are only accessible when the blade is in the folded position. The fittings are not accessible in the work position. Grease fittings (8) on a "When Required" interval.
ReferenceSee Operation and Maintenance Manual, SEBU8594, "Shipping the Machine" for information to fold the foldable blade.