Window Wiper and Wiper Motor (Front Quarter Window) - Remove and Install
Start By:
- Connect the steering frame lock.
- Disconnect hose (1.)
- Remove bolts (3). Remove wiper (4). Remove cap (2). Repeat this step for the remaining wiper.
Show/hide table
Illustration 2 g02448307 - Remove clip (8), washer (7), nut (6), and washer (5). Repeat this step for the remaining clip, washers, and nut.
Show/hide table
Illustration 3 g02448420 - Remove screws (10) and remove cover (9).
Show/hide table
Illustration 4 g02448492 - Cut cable strap (12) and disconnect harness assembly (11).
Show/hide table
Illustration 5 g02448720 - Remove nuts (14) and remove wiper motor (13).
- Repeat Steps 1 through 6 for the opposite side of the machine.
Note: Note the position of the wiper blade assemblies before removal.
Show/hide table
Illustration 1 | g02448265 |
- Install wiper motor (13) in the reverse order of removal.
- Tighten nut (6) to a torque of
30 ± 3 N·m (22 ± 2 lb ft) . - Tighten bolts (3) to a torque of
14 ± 2 N·m (124 ± 18 lb in) .
- Tighten nut (6) to a torque of
Caterpillar Information System:
992K Wheel Loader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
D6K Track-Type Tractor Operation
D6K Track-Type Tractor Engine Starting
980K Wheel Loader Electrohydraulic System MID 082 - CID 0428 - FMI 04
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems Location of Components (Hydraulic System)
980K Wheel Loader Electrohydraulic System MID 082 - CID 0428 - FMI 03
992K Wheel Loader Machine Systems Cab - Install
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Parking Brake - Test and Adjust
980K Wheel Loader Electrohydraulic System MID 082 - CID 0427 - FMI 04
D6N Track-Type Tractor Power Angling Tilt Pins-Lubricate
Repair Procedures for the Exterior Mirror Mounting Bracket {0679, 7301, 7319} Repair Procedures for the Exterior Mirror Mounting Bracket {0679, 7301, 7319}
Installation Procedure of the Coupler Lines Gp for Certain 950K and 962K Wheel Loaders{1408, 5057, 5133, 6129} Installation Procedure of the Coupler Lines Gp for Certain 950K and 962K Wheel Loaders{1408, 5057, 5133, 6129}
980K Wheel Loader Electrohydraulic System MID 082 - CID 0487 - FMI 03
2013/02/25 New Fuel Pressure Regulators Are Used on Certain Machines Equipped with C7 and C9 Engines {1715}
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems General Information (Steering Hydraulic System)
980K Wheel Loader Electrohydraulic System MID 082 - CID 0487 - FMI 04
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems Location of Components (Steering System)
980K Wheel Loader Electrohydraulic System MID 082 - CID 0487 - FMI 08
950K, 962K, 966K, 972K and 980K Wheel Loaders VIMSTM 3G / Product Link Using the Operator Monitor to Determine Diagnostic Codes
D6N Track-Type Tractor Bulldozer Blade Pitch
980K Wheel Loader Electrohydraulic System MID 082 - CID 0487 - FMI 13
D6N Track-Type Tractor Stopping the Engine
D7E Track-Type Tractor Systems Piston Pump (Steering)
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 1326 - FMI 02