Stopping the Engine
Show/hide table
| NOTICE |
|---|
|
Stopping the engine immediately after it has been working under load can result in overheating and accelerated wear of engine components. Refer to the following procedure to allow the engine to cool and to prevent excessive temperatures in the turbocharger housing, which could cause oil coking problems. |
- While the machine is stopped, run the engine for 5 minutes at LOW IDLE.
Show/hide table
Illustration 1 g02443001 - Turn the start switch key to the OFF position. Remove the start switch key.
Caterpillar Information System:
980K Wheel Loader Electrohydraulic System MID 082 - CID 0487 - FMI 13
D6N Track-Type Tractor Bulldozer Blade Pitch
950K, 962K, 966K, 972K and 980K Wheel Loaders VIMSTM 3G / Product Link Using the Operator Monitor to Determine Diagnostic Codes
980K Wheel Loader Electrohydraulic System MID 082 - CID 0487 - FMI 08
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems Location of Components (Steering System)
980K Wheel Loader Electrohydraulic System MID 082 - CID 0487 - FMI 04
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems General Information (Steering Hydraulic System)
2013/02/25 New Fuel Pressure Regulators Are Used on Certain Machines Equipped with C7 and C9 Engines {1715}
980K Wheel Loader Electrohydraulic System MID 082 - CID 0487 - FMI 03
992K Wheel Loader Machine Systems Window Wiper and Wiper Motor (Front Quarter Window) - Remove and Install
992K Wheel Loader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
D6K Track-Type Tractor Operation
D7E Track-Type Tractor Systems Piston Pump (Steering)
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 1326 - FMI 02
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems General Information (Fan Hydraulic System)
980K Wheel Loader Electrohydraulic System New Steering Cylinder Group - Set
980K Wheel Loader Electrohydraulic System Position Sensor (Steering Cylinder) - Set
950K and 962K Wheel Loaders Electrohydraulic System Wiring Harness (Open Circuit) - Test
950K and 962K Wheel Loaders Electrohydraulic System Wiring Harness (Short Circuit) - Test
980K Wheel Loader Electrohydraulic System Service Tools
966K and 972K Wheel Loaders Electrohydraulic System General Information
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems Location of Components (Fan System)
2011/04/22 Improved Engine Shield Assembly Is Now Used on 993K Wheel Loader {7154, 7262}
D11T Track-Type Tractor Machine Systems Piston Pump (Hydraulic Fan) - Disassemble