D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems Caterpillar


Location of Components (Steering System)

Usage:

D7E TAN


Illustration 1g02442884
(1) Steering pump
(2) Steering motor
(3) Hydraulic tank
(4) Charge filter for the implement and steering system
(5) Charge pump for the implement and steering system
(6) Steering Control Lever

Steering Pumps



Illustration 2g02442944
(1) Steering pump
(5) Charge pump for the implement and steering system

Steering pump (1) is mounted on the upper right of the engine flywheel housing. The steering pump is an axial piston pump with overcenter capability. The output direction and flow of the steering pump is controlled by the pump control valve.

The charge pump for the implement and steering system (5) is the last pump in the series of pumps that are mounted to the upper left portion of the engine flywheel housing. The charge pump is a pressure compensated piston pump. This pump provides charge oil for the steering hydraulic circuit. This pump also provides pilot supply oil for the implement valves and the brake valve.

Steering Motor



Illustration 3g01399026
(2) Steering Motor

Steering motor (2) is mounted to the steering planetary of the electric drive propulsion module. This motor is a fixed displacement bent axis motor which can turn in either direction. The direction of rotation is determined by the input flow to the motor from the steering pump. The output shaft of the steering motor turns the steering differential, which causes the machine to turn.

Charge Oil Filter



Illustration 4g02442960
(3) Hydraulic tank
(4) Charge filter for the implement and steering system

The charge filter for the implement and steering system (4) is mounted on the front of the hydraulic tank on the left fender. The filter traps debris that is in the oil in order to prevent damage to the steering system components.

Steering Controls



Illustration 5g01408067
(6) Steering Control Lever

Steering control lever (6) is located on the left console in the cab. The position sensors in the steering control lever send a signal to the machine ECM. The machine ECM controls the response of the steering hydraulic system.

Caterpillar Information System:

980K Wheel Loader Electrohydraulic System MID 082 - CID 0487 - FMI 04
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems General Information (Steering Hydraulic System)
2013/02/25 New Fuel Pressure Regulators Are Used on Certain Machines Equipped with C7 and C9 Engines {1715}
980K Wheel Loader Electrohydraulic System MID 082 - CID 0487 - FMI 03
992K Wheel Loader Machine Systems Window Wiper and Wiper Motor (Front Quarter Window) - Remove and Install
992K Wheel Loader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
D6K Track-Type Tractor Operation
D6K Track-Type Tractor Engine Starting
980K Wheel Loader Electrohydraulic System MID 082 - CID 0428 - FMI 04
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems Location of Components (Hydraulic System)
980K Wheel Loader Electrohydraulic System MID 082 - CID 0428 - FMI 03
992K Wheel Loader Machine Systems Cab - Install
980K Wheel Loader Electrohydraulic System MID 082 - CID 0487 - FMI 08
950K, 962K, 966K, 972K and 980K Wheel Loaders VIMSTM 3G / Product Link Using the Operator Monitor to Determine Diagnostic Codes
D6N Track-Type Tractor Bulldozer Blade Pitch
980K Wheel Loader Electrohydraulic System MID 082 - CID 0487 - FMI 13
D6N Track-Type Tractor Stopping the Engine
D7E Track-Type Tractor Systems Piston Pump (Steering)
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 1326 - FMI 02
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems General Information (Fan Hydraulic System)
980K Wheel Loader Electrohydraulic System New Steering Cylinder Group - Set
980K Wheel Loader Electrohydraulic System Position Sensor (Steering Cylinder) - Set
950K and 962K Wheel Loaders Electrohydraulic System Wiring Harness (Open Circuit) - Test
950K and 962K Wheel Loaders Electrohydraulic System Wiring Harness (Short Circuit) - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.