Inlet Manifold - Remove
Removal Procedure
Start By:
- Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect air inlet piping from the turbocharger to the aftercooler, if necessary.
- Remove bolts (1), air inlet manifold (2) and the gasket.
Show/hide table
 | |
| Illustration 1 | g01279485 |
Caterpillar Information System:
3516C Locomotive Engine Instrument Panel
C4.4 Industrial Engine Fuel Priming Pump - Remove and Install - Electric Fuel Priming Pump
C11 and C13 Engines Liquid Level Sensor (Water Separator)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Filter Fuse, Fuse Status Indicator and Discharge Resistor
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys AC Filter Capacitor
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector Rocker Arm
C7 and C9 On-highway Engines Monitoring System
3516C Locomotive Engine Engine Oil and Filter - Change
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Fan (Controls Cabinet)
3516C Locomotive Engine Refill Capacities and Recommendations
3516C Locomotive Engine Product Description
3516C Locomotive Engine Overhaul Considerations
3116 and 3126 Truck Engines Inlet Manifold - Install
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Filter Inductors
C280 Marine Auxiliary Engines Fuel Injection Enable
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Contactor (K3, K4)
Storage and Troubleshooting for the Vacuum Pump {4287} Storage and Troubleshooting for the Vacuum Pump {4287}
C13 On-highway Engine Exhaust Manifold
TH48-E70 Petroleum Transmission Magnetic Screen (Transmission) - Clean
2006/06/26 Hole in the Turbine Housing of the Turbocharger {1052}
C280 Marine Auxiliary Engines Emergency Stop Switch
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Display Interface PWA
2006/07/24 A New Speed-Timing Sensor is Available {1912}
2006/07/24 A New Speed-Timing Sensor Is Available {1912}