D6N Track-Type Tractor Caterpillar


Cab Filter (Recirculation) - Clean/Inspect/Replace

Usage:

D6N LGP PBA
Note: Inspect the filters and clean the filters more often in dusty conditions.


Illustration 1g02423798

  1. Turn the cover retaining knob and open the filter cover. Remove the filter element. The filter cover is just inside the cab door at the bottom of the cab.

    Note: Remove both of the recirculation filters from the cab.

  2. Clean the filter elements with low-pressure air.

    Note: Do not use air pressure higher than 200 kPa (30 psi). Direct the air from the clean side to the dirty side. Do not wash the filter elements.

  3. Look through the filter toward a bright light. Inspect the filter elements and the gaskets for damage. Replace damaged filters or gaskets.

  4. Install the filter elements. Close the filter cover.

Caterpillar Information System:

2010/11/11 Rock Buckets are Improved for Certain 988G and 988H Wheel Loaders {6102}
980K Wheel Loader Braking and Hydraulic Fan System Control Manifold (Brake, Pilot, Fan)
980K Wheel Loader Braking and Hydraulic Fan System Variable Pitch Fan System
D6N Track-Type Tractor Cab Filter (Fresh Air) - Clean/Inspect/Replace
D6N Track-Type Tractor Brakes, Indicators and Gauges - Test
Installation of the Variable Pitch, Angle, and Tilt Blade on a D6T Track-Type Tractor{6052, 6060, 6701} Installation of the Variable Pitch, Angle, and Tilt Blade on a D6T Track-Type Tractor{6052, 6060, 6701}
621H Wheel Tractor-Scraper Specifications
621H Wheel Tractor-Scraper Rated Load
Installation Procedure for 369-8754 Blade Rack GP {6060} Installation Procedure for 369-8754 Blade Rack GP {6060}
C6.6 Industrial Engine Cooling System
D6N Track-Type Tractor Backup Alarm - Test
950K and 962K Wheel Loaders Electrohydraulic System Monitoring System (Hydraulic Functions)
D6N Track-Type Tractor Cooling System Coolant Extender (ELC) - Add
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Refrigerant Expansion Valve
992K Wheel Loader Machine Systems Fuel Tank (Left Side) - Remove and Install
992K Wheel Loader Machine Systems Fuel Tank (Center) - Remove and Install
2010/11/11 New Software Is Now Available for Engines on Certain Cat Product {1901, 1902, 7620}
D6N Track-Type Tractor Cooling System Coolant Sample (Level 2) - Obtain
2010/11/29 Annunciator Film Kit Is Now Available for EMCP 4 On Cat Generator Sets {4490, 7400}
C3.4B Engines For Caterpillar Built Machines Engine Design
992K Wheel Loader Electrohydraulic System Electrohydraulic Control - Mounting Group
2010/11/17 New Bolts and New Hard Washers With Updated Torque Are Now Used to Retain the Elbow to the Hydraulic Tank Group on Certain Wheel Tractor-Scrapers {5057}
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Control Panel (Air Conditioner and Heater)
Accugrade Software Enabled Attachment Is Difficult to Install on D6N Track-Type Tractor{7220, 7620} Accugrade Software Enabled Attachment Is Difficult to Install on D6N Track-Type Tractor{7220, 7620}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.