Fuel Tank (Left Side) - Remove and Install
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 138-7575 | Link Bracket | 2 |
Start By:
- Connect the steering frame lock.
- Release the hydraulic system pressure.
Show/hide table
 |
|
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately. |
- Refer to Operation and Maintenance Manual, "Fuel Tank Water and Sediment - Drain" and Operation and Maintenance Manual, "Capacities (Refill)" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g02331214 - Remove covers (1).
Show/hide table
Illustration 2 g02331295 - Disconnect hose assemblies (3) and hose (4). Disconnect harness clips (5) from left side fuel tank (2).
Show/hide table
Illustration 3 g02332013 - Attach Tooling (A) and a suitable lifting device to left side fuel tank (2). The weight of left side fuel tank (2) is approximately
125 kg (275 lb) .Show/hide table
Illustration 4 g02332038 - Remove four bolts (6) and left side fuel tank (2).
- Install left side fuel tank (2) in the reverse order of the removal procedure.
Caterpillar Information System:
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Refrigerant Expansion Valve
D6N Track-Type Tractor Cooling System Coolant Extender (ELC) - Add
D6N Track-Type Tractor Cab Filter (Recirculation) - Clean/Inspect/Replace
2010/11/11 Rock Buckets are Improved for Certain 988G and 988H Wheel Loaders {6102}
980K Wheel Loader Braking and Hydraulic Fan System Control Manifold (Brake, Pilot, Fan)
980K Wheel Loader Braking and Hydraulic Fan System Variable Pitch Fan System
D6N Track-Type Tractor Cab Filter (Fresh Air) - Clean/Inspect/Replace
D6N Track-Type Tractor Brakes, Indicators and Gauges - Test
Installation of the Variable Pitch, Angle, and Tilt Blade on a D6T Track-Type Tractor{6052, 6060, 6701} Installation of the Variable Pitch, Angle, and Tilt Blade on a D6T Track-Type Tractor{6052, 6060, 6701}
621H Wheel Tractor-Scraper Specifications
621H Wheel Tractor-Scraper Rated Load
Installation Procedure for 369-8754 Blade Rack GP {6060} Installation Procedure for 369-8754 Blade Rack GP {6060}
992K Wheel Loader Machine Systems Fuel Tank (Center) - Remove and Install
2010/11/11 New Software Is Now Available for Engines on Certain Cat Product {1901, 1902, 7620}
D6N Track-Type Tractor Cooling System Coolant Sample (Level 2) - Obtain
2010/11/29 Annunciator Film Kit Is Now Available for EMCP 4 On Cat Generator Sets {4490, 7400}
C3.4B Engines For Caterpillar Built Machines Engine Design
992K Wheel Loader Electrohydraulic System Electrohydraulic Control - Mounting Group
2010/11/17 New Bolts and New Hard Washers With Updated Torque Are Now Used to Retain the Elbow to the Hydraulic Tank Group on Certain Wheel Tractor-Scrapers {5057}
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Control Panel (Air Conditioner and Heater)
Accugrade Software Enabled Attachment Is Difficult to Install on D6N Track-Type Tractor{7220, 7620} Accugrade Software Enabled Attachment Is Difficult to Install on D6N Track-Type Tractor{7220, 7620}
C15 and C18 Engines Coolant Sample (Level 1) - Obtain
D6N Track-Type Tractor Cooling System Extended Life Coolant - Change
966K Wheel Loader and 972K Wheel Loader Braking and Hydraulic Fan System Oil Coolers and Cooling System Operation