621H Wheel Tractor-Scraper Caterpillar


Rated Load

Usage:

621H DBK
The empty weight of the machine will depend on the configuration of the machine and the options of the machine. Approximate weights are listed below.

If the machine has a CE plate that is required for the European Union, the weight on the CE plate is based upon the sum of the empty machine weight and an 85 kg (187 lb) operator.

Table 1
621H Wheel Tractor-Scraper 
Empty Weight(1)  36185 kg (79775 lb) 
Empty Weight (Push-Pull Attachment) (2)  37440 kg (82542 lb) 
Rated Load  26127 kg (57600 lb) 
Loaded Weight (1)  62312 kg (137375 lb) 
Loaded Weight (Push-Pull Attachment) (2)  63567 kg (140142 lb) 
Cubic Capacity  18.4 Cubic meters heaped
24 Cubic yards heaped 
(1) This weight includes a standard machine, a 75 kg (165 lb) operator, and full fuel tanks.
(2) This weight includes a standard machine that is equipped with a push-pull attachment, a 75 kg (165 lb) operator, and full fuel tanks.

Caterpillar Information System:

Installation Procedure for 369-8754 Blade Rack GP {6060} Installation Procedure for 369-8754 Blade Rack GP {6060}
C6.6 Industrial Engine Cooling System
D6N Track-Type Tractor Backup Alarm - Test
950K and 962K Wheel Loaders Electrohydraulic System Monitoring System (Hydraulic Functions)
621H Wheel Tractor-Scraper Operator Controls
D6N Track-Type Tractor Capacities (Refill)
D8T Track-Type Tractor Machine Systems Implement Control Valve - Remove and Install
994H Wheel Loader Electrohydraulic System Pilot Valve
623H Wheel Tractor-Scraper Engine Air Filter Secondary Element - Replace
621H Wheel Tractor-Scraper Fuel Tank Water and Sediment - Drain
336F MHPU Mobile Hydraulic Power Unit Machine System Specifications Cooling Lines
D6N Track-Type Tractor Towing the Machine
621H Wheel Tractor-Scraper Specifications
Installation of the Variable Pitch, Angle, and Tilt Blade on a D6T Track-Type Tractor{6052, 6060, 6701} Installation of the Variable Pitch, Angle, and Tilt Blade on a D6T Track-Type Tractor{6052, 6060, 6701}
D6N Track-Type Tractor Brakes, Indicators and Gauges - Test
D6N Track-Type Tractor Cab Filter (Fresh Air) - Clean/Inspect/Replace
980K Wheel Loader Braking and Hydraulic Fan System Variable Pitch Fan System
980K Wheel Loader Braking and Hydraulic Fan System Control Manifold (Brake, Pilot, Fan)
2010/11/11 Rock Buckets are Improved for Certain 988G and 988H Wheel Loaders {6102}
D6N Track-Type Tractor Cab Filter (Recirculation) - Clean/Inspect/Replace
D6N Track-Type Tractor Cooling System Coolant Extender (ELC) - Add
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Refrigerant Expansion Valve
992K Wheel Loader Machine Systems Fuel Tank (Left Side) - Remove and Install
992K Wheel Loader Machine Systems Fuel Tank (Center) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.