D6N Track-Type Tractor Caterpillar


Backup Alarm - Test

Usage:

D6N LGP PBA
Turn the engine start switch to the ON position and operate the engine at low idle to perform the test.


Illustration 1g02329578

Apply the service brakes. Disengage the parking brake switch. Move the transmission control lever to the REVERSE position.

The backup alarm should sound immediately. The alarm alerts the people behind the machine that the machine is backing up. The backup alarm should continue to sound until the transmission control lever is moved to the NEUTRAL position or to the FORWARD position.



Illustration 2g02420740

The backup alarm is on the rear of the machine.

The nonadjustable backup alarm is set at the appropriate sound level when the machine is shipped from the factory.

Caterpillar Information System:

950K and 962K Wheel Loaders Electrohydraulic System Monitoring System (Hydraulic Functions)
621H Wheel Tractor-Scraper Operator Controls
D6N Track-Type Tractor Capacities (Refill)
D8T Track-Type Tractor Machine Systems Implement Control Valve - Remove and Install
994H Wheel Loader Electrohydraulic System Pilot Valve
623H Wheel Tractor-Scraper Engine Air Filter Secondary Element - Replace
621H Wheel Tractor-Scraper Fuel Tank Water and Sediment - Drain
336F MHPU Mobile Hydraulic Power Unit Machine System Specifications Cooling Lines
D6N Track-Type Tractor Towing the Machine
C9.3 Engines for Caterpillar Built Machines Air Control Valve - Remove and Install - Control Module, Clean Emissions Module
D6N Track-Type Tractor Stopping the Engine if an Electrical Malfunction Occurs
950K Wheel Loader and 962K Wheel Loader Braking and Hydraulic Fan System Transmission Neutralizer Override Switch
C6.6 Industrial Engine Cooling System
Installation Procedure for 369-8754 Blade Rack GP {6060} Installation Procedure for 369-8754 Blade Rack GP {6060}
621H Wheel Tractor-Scraper Rated Load
621H Wheel Tractor-Scraper Specifications
Installation of the Variable Pitch, Angle, and Tilt Blade on a D6T Track-Type Tractor{6052, 6060, 6701} Installation of the Variable Pitch, Angle, and Tilt Blade on a D6T Track-Type Tractor{6052, 6060, 6701}
D6N Track-Type Tractor Brakes, Indicators and Gauges - Test
D6N Track-Type Tractor Cab Filter (Fresh Air) - Clean/Inspect/Replace
980K Wheel Loader Braking and Hydraulic Fan System Variable Pitch Fan System
980K Wheel Loader Braking and Hydraulic Fan System Control Manifold (Brake, Pilot, Fan)
2010/11/11 Rock Buckets are Improved for Certain 988G and 988H Wheel Loaders {6102}
D6N Track-Type Tractor Cab Filter (Recirculation) - Clean/Inspect/Replace
D6N Track-Type Tractor Cooling System Coolant Extender (ELC) - Add
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.