950K Wheel Loader and 962K Wheel Loader Machine Systems Caterpillar


Governor Pedal

Usage:

950K FER



Illustration 1g02210794

(A) Maximum travel of the governor pedal ... 17 degrees

(B) Reference angle from the floor ... 45 degrees

Caterpillar Information System:

330F MHPU Mobile Hydraulic Power Unit Machine System Cab
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258} Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
950K Wheel Loader and 962K Wheel Loader Machine Systems Window Wiper and Wiper Motor
966K Wheel Loader and 972K Wheel Loader Machine Systems Toggle Switch (Ground Level Shutdown)
966K Wheel Loader and 972K Wheel Loader Machine Systems Toggle Switch (Power Guard Actuator)
C13, C15, and C18 Tier 4 Final Engines Gear Group (Front)
D11T Track-Type Tractor Power Train Pivot Shaft Lubrication Group
966K Wheel Loader and 972K Wheel Loader Machine Systems Power Guard Actuator
C13 Engines for Caterpillar Built Machines Relay (ARD Nozzle Heater) - Remove and Install - Clean Emissions Module
D11T Track-Type Tractor Power Train Track Roller Frame
Rework Procedure for the 902/906/908 Rear Axle Pinion Shaft{0645, 3254, 3256, 3258, 3260, 7561} Rework Procedure for the 902/906/908 Rear Axle Pinion Shaft{0645, 3254, 3256, 3258, 3260, 7561}
2010/12/06 New Implement Valve Centering Springs And Retainers Are Now Used On Certain Track-Type Tractors {5051, 5051}
D11R Track-Type Tractor Lubricant Viscosities - Fluids Recommendations
950K Wheel Loader and 962K Wheel Loader Machine Systems Position Sensor (Throttle)
Installation of 11SU (S/N: 8PP) and 11U (S/N: 8RP) Bulldozer with Dual Tilt Cylinder {6050} Installation of 11SU (S/N: 8PP) and 11U (S/N: 8RP) Bulldozer with Dual Tilt Cylinder {6050}
D9T Track-Type Tractor Lubricant Viscosities - Fluids Recommendations
D11R Track-Type Tractor Maintenance Interval Schedule
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing
993K Wheel Loader Tilt Cylinder Cap Weld Rework Procedure{0679, 5104} 993K Wheel Loader Tilt Cylinder Cap Weld Rework Procedure{0679, 5104}
D11R Track-Type Tractor Power Train Final Drive
994H Wheel Loader Electrohydraulic System Relief Valve - Implement
C13 Engines for Caterpillar Built Machines Engine Support (Front)
D11T Track-Type Tractor Machine Systems Case and Frame
2010/12/16 Procedure to Rework the Parking Brake Oil Pressure Switch on Certain AD30, AD45B, AD55, and AD55B Underground Articulated Trucks {1408, 1435}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.