Gear Group (Front)
Show/hide table
 | |
| 图 1 | g02563987 |
(6) 附件驱动器的螺纹孔 | |
Show/hide table
| 361-5599 前齿轮总成 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 1 | 363-5182 凸轮轴驱动齿轮 | 齿轮的齿数为 96。 |
| 齿轮的孔径为 58.900 ± 0.013 mm (2.3189 ± 0.0005 in)。 |
|||
| 2 | - | - | 将惰轮上的正时标记对准凸轮轴齿轮上的正时标记和曲轴齿轮上的标记。 |
| 3 | 1 | 361-5600 惰轮组件 | 齿轮的齿数为 72。 |
| 齿轮中用于轴承的孔径为 74.452 ± 0.015 mm (2.9312 ± 0.0006 in)。 |
|||
| 安装后轴承的孔径为 69.205 ± 0.013 mm (2.7246 ± 0.0005 in)。 |
|||
| 从齿轮后面嵌入的轴承长度为 1.00 ± 0.25 mm (0.039 ± 0.010 in)。 |
|||
| 4 | 1 | 360-0444 齿轮组件 | 齿轮的齿数 64。 |
| 齿轮中用于轴承的孔径为 60.163 ± 0.015 mm (2.3686 ± 0.0006 in)。 |
|||
| 安装后轴承的孔径为 55.663 ± 0.013 mm (2.1915 ± 0.0005 in)。 |
|||
| 从齿轮后面嵌入的轴承长度为 1.00 ± 0.25 mm (0.039 ± 0.010 in)。 |
|||
| 5 | 1 | 361-5595 曲轴齿轮 | 齿轮的齿数为 48 |
| 齿轮的孔径为 96.900 ± 0.020 mm (3.8150 ± 0.0008 in)。 |
|||
Caterpillar Information System:
D11T Track-Type Tractor Power Train Pivot Shaft Lubrication Group
966K Wheel Loader and 972K Wheel Loader Machine Systems Power Guard Actuator
C13 Engines for Caterpillar Built Machines Relay (ARD Nozzle Heater) - Remove and Install - Clean Emissions Module
D11T Track-Type Tractor Power Train Track Roller Frame
Rework Procedure for the 902/906/908 Rear Axle Pinion Shaft{0645, 3254, 3256, 3258, 3260, 7561} Rework Procedure for the 902/906/908 Rear Axle Pinion Shaft{0645, 3254, 3256, 3258, 3260, 7561}
2010/12/06 New Implement Valve Centering Springs And Retainers Are Now Used On Certain Track-Type Tractors {5051, 5051}
Cat® Grade Control for Wheel Tractor Scrapers Glossary
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders E1172 Engine Idle Shutdown Pending
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders E1171 Engine Idle Shutdown Occurred
966K Wheel Loader and 972K Wheel Loader Machine Systems Fuel Level Sender
D11T Track-Type Tractor Power Train Equalizer Bar
950K, 962K, 966K, 972K and 980K Wheel Loaders Monitoring System System Schematic
966K Wheel Loader and 972K Wheel Loader Machine Systems Toggle Switch (Power Guard Actuator)
966K Wheel Loader and 972K Wheel Loader Machine Systems Toggle Switch (Ground Level Shutdown)
950K Wheel Loader and 962K Wheel Loader Machine Systems Window Wiper and Wiper Motor
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258} Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
330F MHPU Mobile Hydraulic Power Unit Machine System Cab
950K Wheel Loader and 962K Wheel Loader Machine Systems Governor Pedal
D11R Track-Type Tractor Lubricant Viscosities - Fluids Recommendations
950K Wheel Loader and 962K Wheel Loader Machine Systems Position Sensor (Throttle)
Installation of 11SU (S/N: 8PP) and 11U (S/N: 8RP) Bulldozer with Dual Tilt Cylinder {6050} Installation of 11SU (S/N: 8PP) and 11U (S/N: 8RP) Bulldozer with Dual Tilt Cylinder {6050}
D9T Track-Type Tractor Lubricant Viscosities - Fluids Recommendations
D11R Track-Type Tractor Maintenance Interval Schedule
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing