Case and Frame
Show/hide table
图 1 | g02681057 |
Show/hide table
340-1824 外壳和机架总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
1     | 1     | 106-8186 排放阀     | 注:组装该阀时,不应使其低于外壳内壁的平面。 将蓝色 Loctite 242 涂覆到排放阀的内螺纹上。     |
2     | 4     | 4T-9751 衬套     | 安装后衬套的孔径为 89.197 ± 0.061 mm (3.5117 ± 0.0024 in)。 在安装过程中,让衬套与表面平齐。     |
3     | 4     | 3T-8459 衬套     | 安装后衬套的孔径为 89.073 ± 0.061 mm (3.5068 ± 0.0024 in)。 在安装过程中,让衬套与表面平齐。     |
4     | 2     | 8P-0420 轴承     | 安装后衬套的孔径为 57.321 ± 0.060 mm (2.2567 ± 0.0024 in)。     |
5     | 4     | 7T-9014 衬套     | 安装后衬套的孔径为 63.576 ± 0.061 mm (2.5030 ± 0.0024 in)。 在安装过程中,让衬套与表面平齐。     |
6     | 2     | 8P-0389 衬套     | 安装后衬套的孔径为 76.424 ± 0.061 mm (3.0088 ± 0.0024 in)。     |
7     | 2     | 8P-8929 轴端衬套     | 安装后衬套的孔径为 266.929 ± 0.100 mm (10.5090 ± 0.0040 in)。     |
8     | 4     | 3T-8458 衬套     | 安装后衬套的孔径为 114.646 ± 0.059 mm (4.5136 ± 0.0023 in)。 安装长度为 12.0 ± 1.5 mm (0.47 ± 0.06 in)。     |
Caterpillar Information System:
C13 Engines for Caterpillar Built Machines Engine Support (Front)
994H Wheel Loader Electrohydraulic System Relief Valve - Implement
D11R Track-Type Tractor Power Train Final Drive
993K Wheel Loader Tilt Cylinder Cap Weld Rework Procedure{0679, 5104} 993K Wheel Loader Tilt Cylinder Cap Weld Rework Procedure{0679, 5104}
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing
D11R Track-Type Tractor Maintenance Interval Schedule
D9T Track-Type Tractor Lubricant Viscosities - Fluids Recommendations
Installation of 11SU (S/N: 8PP) and 11U (S/N: 8RP) Bulldozer with Dual Tilt Cylinder {6050} Installation of 11SU (S/N: 8PP) and 11U (S/N: 8RP) Bulldozer with Dual Tilt Cylinder {6050}
950K Wheel Loader and 962K Wheel Loader Machine Systems Position Sensor (Throttle)
D11R Track-Type Tractor Lubricant Viscosities - Fluids Recommendations
950K Wheel Loader and 962K Wheel Loader Machine Systems Governor Pedal
330F MHPU Mobile Hydraulic Power Unit Machine System Cab
2010/12/16 Procedure to Rework the Parking Brake Oil Pressure Switch on Certain AD30, AD45B, AD55, and AD55B Underground Articulated Trucks {1408, 1435}
320E and 323E Excavators Machine System Specifications Control Valve (Auxiliary)
C4.4 Industrial Engine Clean Emissions Module
854K Wheel Dozer and 992K Wheel Loader Engine from Torque Converter - Separate
966K Wheel Loader and 972K Wheel Loader Braking and Hydraulic Fan System Service Brake System Pressure - Test
C13 Engines for Caterpillar Built Machines Idler Pulley
966K XE Wheel Loader Machine Systems Pilot Oil Accumulator (Dead Engine Lower) - Remove and Install
D6N Track-Type Tractor Additional Messages
980K Wheel Loader Braking and Hydraulic Fan System Service Brakes - Test
Bench Test Procedure for a D6T and D6R Track-Type Tractor and PL72 Pipelayer Transmission{3030, 3073} Bench Test Procedure for a D6T and D6R Track-Type Tractor and PL72 Pipelayer Transmission{3030, 3073}
953D Track-Type Loader Slope Operation
953D Track-Type Loader Visibility Information