320E and 323E Excavators Machine System Specifications Caterpillar


Control Valve (Auxiliary)

Usage:

320E AWS


Illustration 1g06052764

Table 1
Item  Qty  Part  Specification Description 
8T-4195 Bolt  Torque to 49 ± 5 N·m (36 ± 4 lb ft)
352-7122 Relief Valve Gp  Torque to 95 ± 14 N·m (70 ± 10 lb ft)
095-1590 O-Ring Seal  Lubricate the bore of the O-ring seals lightly with the lubricant that is being sealed. 
095-1787 Backup Ring  Lubricate the bore of the backup rings lightly with the lubricant that is being sealed. 
7I-1248 Spring  Length under test force is 23.9 mm (0.94 inch).
Test force is 6.174 N (1.388 lb).
Free length after test is 28 mm (1.1 inch)
352-7057 Spring  Length under test force is 55.5 mm (2.19 inch).
Test force is 390.1 ± 19.5 N (87.7 ± 4.4 lb).
Free length after test is 59.68 mm (2.350 inch)
153-5276 Special Bolt  Before assembly, apply red Loctite 263 to the threads of the special bolt.
Torque to 50.0 to 59.8 N·m (36.9 to 44.1 lb ft)
Stem  Torque to 240 ± 40 N·m (177 ± 30 lb ft)

Caterpillar Information System:

2010/12/16 Procedure to Rework the Parking Brake Oil Pressure Switch on Certain AD30, AD45B, AD55, and AD55B Underground Articulated Trucks {1408, 1435}
D11T Track-Type Tractor Machine Systems Case and Frame
C13 Engines for Caterpillar Built Machines Engine Support (Front)
994H Wheel Loader Electrohydraulic System Relief Valve - Implement
D11R Track-Type Tractor Power Train Final Drive
993K Wheel Loader Tilt Cylinder Cap Weld Rework Procedure{0679, 5104} 993K Wheel Loader Tilt Cylinder Cap Weld Rework Procedure{0679, 5104}
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing
D11R Track-Type Tractor Maintenance Interval Schedule
D9T Track-Type Tractor Lubricant Viscosities - Fluids Recommendations
Installation of 11SU (S/N: 8PP) and 11U (S/N: 8RP) Bulldozer with Dual Tilt Cylinder {6050} Installation of 11SU (S/N: 8PP) and 11U (S/N: 8RP) Bulldozer with Dual Tilt Cylinder {6050}
950K Wheel Loader and 962K Wheel Loader Machine Systems Position Sensor (Throttle)
D11R Track-Type Tractor Lubricant Viscosities - Fluids Recommendations
C4.4 Industrial Engine Clean Emissions Module
854K Wheel Dozer and 992K Wheel Loader Engine from Torque Converter - Separate
966K Wheel Loader and 972K Wheel Loader Braking and Hydraulic Fan System Service Brake System Pressure - Test
C13 Engines for Caterpillar Built Machines Idler Pulley
966K XE Wheel Loader Machine Systems Pilot Oil Accumulator (Dead Engine Lower) - Remove and Install
D6N Track-Type Tractor Additional Messages
980K Wheel Loader Braking and Hydraulic Fan System Service Brakes - Test
Bench Test Procedure for a D6T and D6R Track-Type Tractor and PL72 Pipelayer Transmission{3030, 3073} Bench Test Procedure for a D6T and D6R Track-Type Tractor and PL72 Pipelayer Transmission{3030, 3073}
953D Track-Type Loader Slope Operation
953D Track-Type Loader Visibility Information
953D Track-Type Loader Mirror
966K XE Wheel Loader C9.3 Engine Supplement Clean Emissions Module - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.